6105 Placement in a 215

[MstgKillr]

What would be a good starting point for placement of 2 6105's in a 215 (72x24x29).

 

[Jar*Head]

Rear corner flow across the tank. Controller on interval II 30%-100%.

 

[AcroporAddict]

<a href=showthread.php?s=&postid=13546750#post13546750 target=_blank>Originally posted</a> by Jar*Head
Rear corner flow across the tank. Controller on interval II 30%-100%.

OK, but where are the pulse and interval dials set, and which interval period (7095 controller) do you use?
Dave

 

[Jar*Head]

Interval is 1.5s, pulse i dial it half way approx 30 sec. I am using interval II

 

[AcroporAddict]

<a href=showthread.php?s=&postid=13550157#post13550157 target=_blank>Originally posted</a> by Jar*Head
Interval is 1.5s, pulse i dial it half way approx 30 sec. I am using interval II

Thank you, Sir!
Best,
Dave

 

[MstgKillr]

I can't seem to get the placement right. The sand in the front center of the tank gets pushed back.

Where in the back corner do you place it, top, middle, or bottom?

Where do you point it, up, down, straight across, front corner, center?

What setting do you set it on %?

 

[shawnz28]

I would try side glass, about 3/4 of the way up or so from bottom and about 2/3-3/4 the way back both pointed at the opposite corners of the tank. One thing to remember is there is no perfect placement, it is a bit of trial and error due to different rockwork etc...

 

[Jar*Head]

Totally agree with Shawn. You can try to point it upward and across the tank (NOT THE FRONT PANEL) highly suggest to point it at the opposite front corner.