6201 not working (sort of)

[dtm]

I have a 6200 and a 6201 in my tank, hooked up to a multicontroler. The 6201 sometimes works and sometimes doesnt. very weird........ can I send it in Roger?

 

[rvitko]

I think I know the problem. I will PM you something to check.

 

[schwaggs]

I have the same problem with a 6100/6101 combo. I have one 6100 and one 6101. The 6100 always works. The 6101 will work for a couple days then quit running. It doesn't even perform the periodic prop spin. I unplug both power plugs for a few minutes, plug them back in and the 6101 works again for a few days. What can I do to remidy this?

 

[tbone28]

Roger, I use 6201's. Mine work, but am curious to hear what your solution is, just in case I need it in the future.

Thanks

 

[rvitko]

Schwaggs, I will PM you some things to test.

tbone28, there are many possible causes for these issues so rather than post a blanket statement that from past experience leads to numerous incorrect "me too" posts I will keep to PM's. The problem can be anything from the transformer, the motor the drive unit, the controller cable or settings used.