deklin
New member
I have a 6205 pump on a 7095 controller that has been working great for years but recently it stopped shutting off when pressing the food timer button.
Nothing was changed or touched in the sump area, it was working fine one day and not the next. I use the interval mode that cycles the pump on/off and I also noticed that it is now just running all the time. There is another pump on the 7095 that appears to be working okay.
Initially I thought it was a controller problem but I tried moving it to another channel and also tried swapping the cables but the 6205 continues to have a problem. The green channel lights on the 7095 are turning off when they should. With nothing else connected to 7095 I did confirm that it powers the controller when the 6205 is connected. So now I am thinking the problem is with the pump.
Do you have any suggestions on anything I could do to fix the issue or do you think I will just have to get by with a non-controllable 6205 until I eventually have to replace it?
Thanks!
Nothing was changed or touched in the sump area, it was working fine one day and not the next. I use the interval mode that cycles the pump on/off and I also noticed that it is now just running all the time. There is another pump on the 7095 that appears to be working okay.
Initially I thought it was a controller problem but I tried moving it to another channel and also tried swapping the cables but the 6205 continues to have a problem. The green channel lights on the 7095 are turning off when they should. With nothing else connected to 7095 I did confirm that it powers the controller when the 6205 is connected. So now I am thinking the problem is with the pump.
Do you have any suggestions on anything I could do to fix the issue or do you think I will just have to get by with a non-controllable 6205 until I eventually have to replace it?
Thanks!
