7094 controller is done?

[turtlespd]

Well after a year or so of good usage i think my controller has gone bad. All of the features work fine except the Inteval mode. After getting the manual sent to me i discoverd when i have it on interval mode the led is sapposed to go from green to red,correct? Well for some reason it stays green. I also notice a few other funky things like wheni plug one of the inputs in the controller turns on which is how it hink it use to work but for some reason only one of the cables will do this half the time. I been messing with it, trying to reset it by turning eveything off for 5 min at a time and no luck. Can the controller be sent in to be looked at? or should i be looking for a new controller. Another thing i noticed is it looks like one stream is running harder than the other when both are set at 100%. I hope i dont have to send in eveything cause i have no other means of flow in my tank. Please let me know what i can do to adress this problem

Paul

 

[rvitko]

The LED used to be red but they don't change color, green is the color they used for the last year or so of production. The controller only is on when the first socket is used, on the 7094 which sockets you used were critical. Their are some differences in pumps that may affect flow, this is due to resistance from cables, the controller, driver, pump, the pump being a bit dirty also has an impact. It doesn't sound like anything is wrong.