7095/6055 question

[jnb]

I have a 7095 and 2 6000's on my 107 gallon reef, I have installed a 3 foot by 16 inch deep, 12 inch high nano sharing the sump with the larger tank

I am considering 2 6055's for the nano but the max output will probably be too much for it causing sand storms. I have my 7095 running the 6000's 30/100 percent.

Is there any way to attach the 6055s to the 7095 running the same program as my 6000's but ramp them down either electronically or physically?

Please advise.

J Nicholas Boyd

 

[rvitko]

Yes, the 6055 has a voltage setting on the transformer so it can actually pump as little as 200gph if set to 12V and 30% on the controller.

 

[jnb]

so - when my 7095 is set at 30/100 pulsing, etc

the 6055s would be running about 200/666
- sounds perfect

is this a variable adjustment or just a low/high switch? - is 200 ok for the 6055 in general?

<a href=showthread.php?s=&postid=10830921#post10830921 target=_blank>Originally posted</a> by rvitko
Yes, the 6055 has a voltage setting on the transformer so it can actually pump as little as 200gph if set to 12V and 30% on the controller.

 

[rvitko]

It is switchable in increments of 2V from 12-24. It is OK to run them this way.