7095 multicontroller not working?

[sufunk]

I got my 2 new 7410.602 transformers to upgrade my 6000's today. I swap out the transformers, plug it in and line 2 wont work. Nothing from the right Tunze and line 2's green light isnt lit up. Every like 15 seconds the light will flicker for a millisecond like it's trying to come on but nothing. I put the old transformer back on and it wouldnt fire on line 2 either. I tried both line 2 inputs and nothing.

Did my 7095 get fried??? Hopefully maybe i'm missing something here but that seems to be the case. Line 1 works fine so i plugged both into line 1 but that defeats the whole purpose of the 7095. It's basically just a food timer for me now.

Any suggestions or troubleshooting for me please???

 

[rvitko]

Try using the cables from channel 1 and try using a different mode.

 

[sufunk]

Roger, After i talked to you, i went in and played around with it. I got pulse, interval1 and interval2 to work on line 2 but sequential still wouldnt work no matter what i tried. Sequential was the setting i had it on when i switched out the transformers.

I just set it on interval2 and line 2 worked fine. That worked for a few hours and just a few minutes ago i turned on the food timer and fed the fish. After the pumps restarted, i figured i'd give it another try and now sequential works!

I dont know what happened,lol, but everything is good now! Thanks for the transformers and the help!

This is why Tunze is #1!

 

[rvitko]

Sequential has always been a very buggy program, if you don't have four pumps, I don't recommend sequential. It is really designed for use with 4 pumps one plugged into each socket that can be turned on sequentially. When you don't have four pumps it seems to fail to recognize the other sockets and this program really is of little use without every socket occupied.

 

[sufunk]

Cool, thank you for the help Roger!