7095 - no english instructions - how do I set...

[chrissreef]

1st - wow, these Tunze = quality! I'm hooked now!

Ok, my new 7095 has no english instruction manuals... (German? Russian? Spanish?)

I want two 6101's at 50% strength for 60 sec and then go to 10% while the other two 6101's go 50% strength for 60 seconds

repeating with no pump ever turning off. Just 50% strength and then little strength.

How do I set the controller? I'll keep pushing buttons until it gets there. Right now the pumps seem to alternate randomly - which is cool but not what I want.

Thanks!

 

[chrissreef]

Re: 7095 - no english instructions - how do I set...

oops - double post

 

[rvitko]

There should be two manuals in the box, one in German, English and French and one in Russian, Italian and Spanish and the languages alternate so they are nearest the corresponding illustration. You can download them on tunze.com as well.

What you want to do is not possible, the speed range is 30%-100%. The closest would be interval 2 with a 6 second pulse from 30-50%. Set the pulse to 6 seconds, the speed on the top knobs to 50% and the bottom knobs to 30%, plug one pump into each channel. Set an interval of 1 minute. In this setting one pump will idle at 30%, one will pulse from 30-50% every 6 seconds and in 1 minute they will switch.

 

[chrissreef]

worked! TY!