90 Gallon Frag Tank Build

psless

New member
Well it is time to begin my frag tank. I got out of the hobby over a year ago and my best friend, cozart, has put the bug back in me.

I purchased an acrylic 90 gallon 6' X 2' X 1' tank from a fellow reefer not too long ago. So far I have purchased the tank, EuroReef CS80 skimmer, Iwaki pump, 30 gallon acrylic sump, and some live rock. I have framed out the stand based on some plans I found on RC. Below are a few pics of my progress.

1203191st_stage_frame_a.JPG


120319frame_with_floor_and_sump_a.JPG


120319frame_with_floor_and_sump_b.JPG


120319frag_tank_a.JPG


120319frag_tank_b.JPG


I wasn't going to skin the stand but cozart talked me into it. In addition to what I have already purchased, I plan on getting 3 luminarcs, ballasts with 12k Reeflux bulbs, aquacontroller jr., and another pump for a closed loop system. I am sure I will pick up more along the way.

I hope to get a little more done this weekend. I will post more pics if I do.

Patrick
 
That looks really nice I will be following this thread. Do you have a link for the plans on the stand build? Also which Iwaki pump did you buy and why did you go with that one?
 
<a href=showthread.php?s=&postid=13022031#post13022031 target=_blank>Originally posted</a> by Emster
That looks really nice I will be following this thread. Do you have a link for the plans on the stand build? Also which Iwaki pump did you buy and why did you go with that one?

Hi Emster,

I got the Iwaki 30wrt??? It is the American model. I went with it because it is a WAKI!! JK I am not sure, I have heard good things about them and decided to roll the dice.

The stand plans are here:

http://www.reefcentral.com/forums/showthread.php?s=&threadid=1169964

Patrick
 
zart,

didn't take much time to post. I decided I wanted a nice little history of the build from start to.... well I guess you never really finish :)

p
 
I think I am going to go with 3 250W SE Metal Halides. Probably Reeflux 12k or 14k. Not sure yet. I want good growth but also want it to look nice.:)

Thanks!
 
<a href=showthread.php?s=&postid=13022725#post13022725 target=_blank>Originally posted</a> by psless
Hi Emster,

I got the Iwaki 30wrt??? It is the American model. I went with it because it is a WAKI!! JK I am not sure, I have heard good things about them and decided to roll the dice.

The stand plans are here:

http://www.reefcentral.com/forums/showthread.php?s=&threadid=1169964

Patrick

Well IMO Iwaki's are bullet proof pumps and the japan motors are best. The wmd are american made and the md are Japan. This is just my opinion but you could probably get away with 3 150watt halides on that tank.
 
Well I added a few cross braces under the top and bottom. I also put on the top and bottom of the stand. I plan on sanding (a little) later and putting on a coat or two of white paint. Probably Kilz.

I also got a little help from my son today. He sanded and helped wash my dead rock.

Enjoy!

120319washing_rock.jpg


120319under.jpg


120319under_top.jpg


120319top_and_bottom.jpg
 
I put a couple of coats of Kilz paint on it today. Hopefully I can grab a few bulk heads this week and begin plumbing the tank.

My wife still doesn't like the stand but it will have to do until I have more time to skin it. I will probably set it up as is and skin it later.

Here are a few photos.

120319painta.jpg


120319paintunder.jpg


120319paint.jpg
 
no prob, like I said the pink stuff is easier to work with. Cuts easier, makes far less mess, denser(sp) etc....
 
For Sale

For Sale

Well, I decided to go another route and sell this frag setup. I will be getting a different rig.

I'll sell the tank and stand for $300. I put a lot of time into this. It will come with the 3 step acrylic scratch remover.

The pump is brand new. I wet tested with fresh water and that's it. I will sell it for $70.

The sump I can let go for $75

And I have a euroreef skimmer which is in mint condition. Only a few hours on it. I will let it go for $150.

PM with offers.

Thanks.

Patrick
 
Back
Top