A few questions about Profilux Plus II

[xenon]

I updated the firmware on my new controller to 4.03 today.

One thing I noticed was when I sync the date/time with my computer the controller lags behind. I loose about 5mins for every 30mins that passes. Not sure why the time would be slow on the controller.

Another question is how do I program dosing pump#4 to be my auto-top off pump that is controlled by an optical level sensor?

 

[AQD_ottawa]

are you using V4.03 PC software also?

 

[kidney514]

Re: A few questions about Profilux Plus II

<a href=showthread.php?s=&postid=13485974#post13485974 target=_blank>Originally posted</a> by xenon
Another question is how do I program dosing pump#4 to be my auto-top off pump that is controlled by an optical level sensor?

What is the socket number the unit 4 on your dosing pump?
Just put that in the socket definition as water1

 

[xenon]

<a href=showthread.php?s=&postid=13486196#post13486196 target=_blank>Originally posted</a> by AQD_ottawa
are you using V4.03 PC software also?

Yep.

ProfiLuxControl II V4.0.3.0

 

[xenon]

Re: Re: A few questions about Profilux Plus II

Re: Re: A few questions about Profilux Plus II

<a href=showthread.php?s=&postid=13486740#post13486740 target=_blank>Originally posted</a> by kidney514
What is the socket number the unit 4 on your dosing pump?
Just put that in the socket definition as water1

Wow that was simple.

 

[AQD_ottawa]

If you still have timing issue please email me at sales@aqua-digital.com

 

[xenon]

I kept it plugged in overnight and sync'ed the time back up with my computer and so far it's perfect!

Maybe it's because the internal battery was not charged. When I turned it on the date was 2005 and the version was 3.0.8.1 so it's been a while since it was plugged in.

 

[xenon]

I do have a few other questions about the Profilux Plus II

I currently have the 4pump doser but I would like to add a single flash stick and two Tunze 6055 powerheads.

Does the Plus II have enough ports to make it work? Do I need a Profilux powerbar for any of it?

Thanks again!

 

[ReefRockerLive]

xenon, both the flash stick and Tunze streams require an L port. As long as you have a free slot available this will work. You can use one of the L slots to control both the flash stick and tunze, but you will need the splitter cable.

HTH

 

[AQD_ottawa]

The dosing pump can be plugged into the western socket on the digital power bar and numbered accordingly.

 

[xenon]

<a href=showthread.php?s=&postid=13494780#post13494780 target=_blank>Originally posted</a> by AQD_ottawa
The dosing pump can be plugged into the western socket on the digital power bar and numbered accordingly.

Do I absolutely need a GHL powerbar to make the dosing pumps work?

 

[AQD_ottawa]

Nope, just plug it into S1-S4

The only thin you ever plug into S ports are dosing pumps and power bars

Tunze pumps, dimmable lighting controls, LED sticks etc go into L ports

 

[xenon]

Perfect.

My stand has limited space so I was wondering if you had the dimensions of the 6way power bar.

Also what are the dimensions of the propeller breeze 3 fan?

That should be all the question I have until I upgrade my controller. lol

 

[kidney514]

<a href=showthread.php?s=&postid=13495512#post13495512 target=_blank>Originally posted</a> by xenon
My stand has limited space so I was wondering if you had the dimensions of the 6way power bar.

21" x 2.5" x 2"