Ac3 alarm problem

[Gieser]

I am getting alarms on my AC3 and can't figure out why I am getting alarms.

Here is how the "relevant" programming is set up:

Current Status is:

Jan 19 2012 23:57:41
Temp pH ORP
76.4 8.14 226
TmpA pHA1 ORPA
76.6 2.34 347

Please Note: ALARMS ARE ONLY SET FOR TEMP, PH, ORP...NOT FOR TEMPA, PH1 or ORPA

If Time > 00:00 Then ALM OFF
If pH > 08.60 Then ALM ON
If pH < 07.95 Then ALM ON
If ORP > 450 Then ALM ON
If ORP < 125 Then ALM ON
If Temp < 74.0 Then ALM ON
If Temp > 79.0 Then ALM ON
If Temp > 76.5 Then HT1 OFF
If Temp < 75.5 Then HT1 ON
If Temp > 75.5 Then HT2 OFF
If Temp < 74.0 Then HT2 ON

Any Ideas?

 

[Metal Man 1221]

Is this all under your alarm config?
I assume HT is heater?

Can you provide a screen shot of your outlet config for your alarms.

Edit* sorry, just noticed you said AC3 not apex, not sure if the programming syntax is any different.

Have you tried posting this in the Neptune Systems thread?

If not its located <a href="http://reefcentral.com/forums/forumdisplay.php?f=368">Here</a>