unbreakable
D:
I have a digital power bar on s1-s4, was wondering how to add a 4 way power bar?
Adding 4 Way Switchable Plug Bar
- Thread starter unbreakable
- Start date
unbreakable
D:
Looking at the manual i see that digitalpower bars go to s1-s4 and non digital power bars go to s5-s8
after assigning the digital power bar and starting the number at 1 on for the power bar, i plug in the regular 4 way controller.. but when I edit the function for socket number 6 to always on, my 3rd outlet on the 4 way bar is the one being activated, so I guess theyre crossed
any ideas?
after assigning the digital power bar and starting the number at 1 on for the power bar, i plug in the regular 4 way controller.. but when I edit the function for socket number 6 to always on, my 3rd outlet on the 4 way bar is the one being activated, so I guess theyre crossed
any ideas?
AQD_ottawa
New member
Yep 
The clue is in the numbering of the analogue inout socket S5-S8
Analogues can not be socket programmed they are fixed to what S socket they are plugged into so in this case that is S5-S8 so these sockets number are already in use.
Program the digital power bar to S9 onwards, you can then use socket through 1-4 at a later date for a dosing pump etc.
The clue is in the numbering of the analogue inout socket S5-S8
Analogues can not be socket programmed they are fixed to what S socket they are plugged into so in this case that is S5-S8 so these sockets number are already in use.
Program the digital power bar to S9 onwards, you can then use socket through 1-4 at a later date for a dosing pump etc.
unbreakable
D:
Yep
The clue is in the numbering of the analogue inout socket S5-S8
Analogues can not be socket programmed they are fixed to what S socket they are plugged into so in this case that is S5-S8 so these sockets number are already in use.
Program the digital power bar to S9 onwards, you can then use socket through 1-4 at a later date for a dosing pump etc.
Thank you! One last thing, is there a manual for connecting the PIII to the internet? I'm running on 5.04. I put a static ip, changed the default gateway and subnet mask through the PC software, along with the other info in my router.. but when i type in the local ip of the PIII nothing comes up, it just comes back in error.
Is there something I need to load or do?
Thanks again
AQD_ottawa
New member
Hi
There is no manual specifically becuase every clients connection will differ from one another, however we have a mulitude of talents on here that would be willing to help you, sorry I am not one of them Gareth got me connected.
I think you will also find benefit in creating an account and post any tech questions in the GHL global official help forum where you will always get a faster reply especially to connectivity issues
www.aquariumcomputer.com/forum
There is no manual specifically becuase every clients connection will differ from one another, however we have a mulitude of talents on here that would be willing to help you, sorry I am not one of them Gareth got me connected.
I think you will also find benefit in creating an account and post any tech questions in the GHL global official help forum where you will always get a faster reply especially to connectivity issues
www.aquariumcomputer.com/forum
unbreakable
D:
I still havent been able to use the forum because I haven't been granted permission to post threads.
I have WAN and LAN, would having WAN conflict with the LAN? No matter what I do, I still can't access the webserver. I thought it would be easy but not sure what's happening.. tried looking through the support forum
unbreakable
D:
turns out something is not seated properly within the PIII. the LAN lights were not until i moved the unit. I can access the webserver now
Similar threads
