Advice for, Cube tanks stream..

[imthe1]

I have 32 "(w) X32" (l) x22s " (h) cube tank.

There is overflowbox in middle.

I am planing 6055x2 and 7095, and is considering installation of 4 of 6055s.

Ask 6055s' setup, recommendation for SPS only.

 

[RokleM]

I think you'll get an overwhelming "not enough flow" personally for an SPS tank if you install two. To save some money, you could install two of the 6055's and two 6025/6045's.

 

[rvitko]

You could also use 2 6000's.

 

[imthe1]

thanks! Eric,Roger

Is running 6060x2 now.

However, 6060 (or 6000) is too big.

If install 6055x2 on back side

How do direction of stream of 6055s and setting of 7095 become?

Also, in the case of 6055x4?

Finally, can you control each 4 6055s?

thanks for inputs.

 

[rvitko]

You can control the 6055's. The settings you would have to try and see what works for you but keep in mind 4 6055 will take as much space as 2 6000's and cost much more. The direction and placement would be really the same as for the 6060 or 6000's but you can aim the pump or down as you need. The flow of the 6055 is a smaller pattern, only 4ft by about 18" in diameter.