AGA 210 needing pumps

[RLHornbeck]

I have a 210 AGA that I am setting up for mainly SPS and needing advice on which pumps to get and the placement of them.

This is the tank with dual overflows on the back wall about 10" in from each end. I am setting the tank up with the front and one side viewable, therefor would like to keep the pumps off those walls.

I would like to use the controllable pumps as I am controlling the tank with an Apex. Also what extra parts do I need to connect the pumps to the Apex?

Thanks
Ryan

 

[shawnz28]

In most cases a pair of 6105s would be recommended. While this is a Tunze forum if you plan to control with the Apex you need to purchases a pair of the Apex to Stream cables from Neptune.

As for placement most of the time I would put a pump on each side pane about 2/3 back and point them at the opposite front corner. Seeing as how the one pane needs to be open I would put that pump on the back glass near the corner and again point to the opposite corner so get flow across the tank. Rockwork and coral placement may need kept in account.