Alarm wont stop

[Bebo77]

Roger i have a(newer model) 6200 who's alarm went off yesterday.. i took the pump apart and cleaned it overnight.. well i plugged it back in and the alarm continues...

what else should i do?

Thanks

Gabe

 

[BreadmanMike]

Gabe,

I had this happen to me once... When I put the impeller back in, I pushed it in too tight or the o-ring got goofed up and it was stuck. I pulled it back apart and it worked after that. Might not be your problem, but it's a thought.

 

[Bebo77]

thanks.. tried what you said but it didnt fix it...

 

[rvitko]

How old is the pump?

 

[Bebo77]

been running since jan 06

 

[rvitko]

If you have a watt meter you could check the wattage, if it is very low the motor is dead, if it is very high the driver is dead. If it is nearly normal the motor is just jammed, are you sure the pump is clean, following the insructions on the stickied thread at the top of this forum?

 

[Bebo77]

yup... i cleaned them once before when the alarm went off and had no problems..

ill see if i can get my hands on a watt meter

 

[rvitko]

It is probably best to just send it in if you are sure it is clean, it will only take a day or two to repair and ship back.

 

[Bebo77]

Roger is this you

Marine International LLC
TUNZE USA
305 Victor St
Austin TX 78753

 

[rvitko]

Thats it!

 

[Bebo77]

its in the mail Roger...


thank you