Anyone got a Hole saw i can use for a day

jwblocal701

jwblocal701

New member
looking to borrow a 1 3/4 and a 1 " hole saw for glass in in plainfield area
if it is ok i use it please let me know
 
It's a long drive to Rockford, but I have them. If you are willing to drive out here, perhaps Rod's would be a better choice. I believe Dekalb would be closer and he has other stuff too
 
I've got 'em but I think Cedar Lake is farther than Rockford....

You could probably buy 'em from Ebay for less than the gas. I got my whole set (1/2"-4") for less than $50 including shipping from a guy in Hong Kong....

RandalB
 
I have one for 3/4" bulkheads you can borrow. Unfortunately it is slightly off-center so it doesn't make the cleanest holes but I have used it successfully make around half a dozen holes.
 
the bulkheads i have muist be a little bigger cause they bulkheads alone are 42mm which is a litttle ove 1 1/2 inch its actually 1 6/8
 
Why so big on the bulkheads?
My 220 has overflows in the corners. 2 holes each corner 1 is a 1.5 drain and the other for a 1" return. A 1.5 return is huge. Also do they make bulk heads and pvc in those odd sides. I have seen 1.25, but not 1.75 pvc. and neither as bulkheads.
 
i dont think the hole in the bulkhead is that bit
its the outside diameter
they are bulkheads from petland in naperville closing what they used on there tanks
 
You must log in or register to reply here.

Similar threads

W
Cycling new Tank
Replies
2
Views
435
C.Eymann
C.Eymann
revclyburn
Need some thoghts on skimmers
Replies
7
Views
431
Timfish
Timfish
P
Can I get another fish?
Replies
3
Views
504
griss
griss
650-IS350
Brand New SERA X-Feeder ($50) "Negotiable"
Replies
1
Views
153
650-IS350
650-IS350
M
Another Reefer back from a 13 year Hiatus
Replies
9
Views
659
EchoVetEcho
E
Back
Top