Anyone up for another 135 Thread?

o boy tough call being on the bottom i think your gonna have an issue with it i would try to replace the tank. that busts boy your gonna be really mad and i think your parents as well call glass cages tell them you didn't notice it or till them it just chipped nothing hit it. maybe a manufactureing problem hehe
 
I already emailed glasscages, no response yet. It is concrete floor so we wouldn't have to worry about water damage. I siliconed it back, and it's solid. hmmm
 
My dad is very thickheaded and is positive it is fine. So if something goes wrong, he will reimburse me without question.
 
Tyler, I wish I had seen this earlier.

paulpp187 is right, I wouldn't mess with it. Usually, if a tank initially holds water, it's much more unlikely it will leak down the road.

That being said that is a sizeable chip.

I also wish I had caught you before you threw in the southdown....you probably should have water tested it for awhile first.

The tank should definately be replaced by glasscages. However, they don't have the best reputation, and they will probably tell you that you should have inspected the tank thoroughly upon receipt.

Your 180 AGA stand is not appropriate for your tank. You should use a tank stand that is MADE for your tank, or you should have a stand custom built for your tank.

But you do NOT want to mess with an existing stand. Here's why:

Glass tanks are meant to be supported by the bottom trim all the way around.

AGA stands are specifically designed to support the entire tank around the edge. They are designed to be strongest at those pressure points. If you use a stand that is larger, you're not supporting the tank with anything- there is generally no support underneath the "top" itself.

AGA stands are made with a very bare minimum of materials, therefore, they are designed to hold a particular distribution of weight within a given tolerance.

If you modify the stand with 2x4s you are changing the dynamics of the stand. You may be relieving pressure from one area...and creating more support, but you are subsequently relieving, or shifting pressure from other areas....I would think that this would end up being a flimsy stand, and it would put added stress on the tank.

The only way I can see you successfully using the 180 stand would be to recreate the same exact inner shell "within" the housing of the 180 stand. Any supports within the center are meanigless, and the center braces on the 180 would be negated if you're not resting the edging on that particular pressure point.

The "top" of the stand will NOT support that size tank in any fashion.
 
I did test the tank, for 36 hours, and it passed with flying colors. I've had water in it now with the Southdown, and now my rocks in, and no problems at all. About the stand, I don't think you understand what we did. We tried to recreate what AGA does, supporting the corners and front and back. We put the 2x4's 6" in, where my tank would end, so that it is supported there. Here is a diagram, the boxes are the 2x4s:
2a00hz
 
Tyler, that looks much better. You're right, it initially sounded like you just tried putting a row or 2x4s in the back.

EVEN SO...I'd still be a bit weary. I'd also be concerned about any amount of your tank that hangs off.

What did Rich have to say? Was he able to take a look?
 
Yup, we fixed the leaning off too, theres support under that now too :)
Rich couldn't come by, he didn't get off work till 5, and I had plans at 4-11. My dad is so positive that it will be fine. I wanted to fix certain parts, and I forced him to, but if something does go wrong, it's on him, and I've got other options (extra tanks, rubbermaids, etc.)
 
Not full, I still have to finish the plumbing, waiting for something in the mail :rolleyes:
Got my Mag18 today, and picked up EVERYTHING in New York; literally, my basement is now an LFS. Giovanni really hooked me up. Pics later tonight :D
 
Pics of the move today:
Step One: Obtain UHAUL
UHAULMedium.jpg


Step Two: Drive to Manhattan
ManhattanMedium.jpg


Step Three: Break Down Tank
BreakingdowntankMedium.jpg


Step Four: Put Live Rock in Tubs
RockintubMedium.jpg


Step Five: Admire 770watts of pure lighting power
LightsMedium.jpg


Step Six: Wonder why Giovanni has an MP5 in the garbage :confused:
UziMedium.jpg


Step Seven: Wait for Tyler to post the full tank pics tomorrow :D
 
Here are pictures as of a few minutes ago (be warned, lack of awakeness is at fault):
2a1f0w

2a1f2c


Still waiting on another batch of water, that's for the morning. Hopefully it will clear soon.
 
Tyler, lookin good, lookin good.

The semi was there in case you decided NOT to take the tank..:)

The rock looks like it's halfway decent.

From those pics, it looks like the tank was shot for awhile(or was this just from the breakdown). If so I wouldn't use any of the sand.

Are you going to add more rock eventually?

I'm glad you finally got to grab that tank! I applaud your ingenuity and recycling capacity. This thread should go down in the database for those trying to start up a large tank on a budget. :)
 
I'm not using the sand; Giovanni's tank was "dead" (with the exception of hermits and such) for the past 8 months or so. The rock has a lot of corraline on it, really really purple, but I'm no good with a camera. It should look nicer once I fill the tank, the water clears, and I get my lights over it (2 weeks, my cousin is building the canopy). That's good though, because there is a slight bubble algae problem. I'm going to pick up some emerald crabs, along with some other cleaning critters at this next meeting, and that should help. The no lights factor should help too.

I don't think I need to add more rock, as there's at least 180lbs of it. It is very VERY cramped in there right now, as the tank was not full and I wanted to have all the rock submerged so it would live. Once its filled, then I can spread it out, and it will look full.

My refractometer should arrive today; I had to use a cheap hydrometer that I calibrated with my RO/DI water to make my first batches. My Stockman Standpipe (Mr. Stockman made it for me, I didn't want to screw it up :lol: ) is being shipped out on Monday. The tank should start looking like a tank by Friday. I'll have more pictures of equipment and stuff as it gets more organized; there is SO much stuff.

It would be cool to be put in the database :D. So far I've spent only around $1,000, and after I sell stuff from Giovanni's setup ($2,000), I should only be spending around $400 on Giovanni's setup, so around $1,400 total before livestock. But I should be able to get some cheap corals at CTARS meetings ;). So my budget plan has worked accordingly :)
 
Hehehe...well it's not Giovanni's tank. I bought a bigger tank, because I wanted a tang, and I didn't think that it would be as healthy as possible in a 90; so I got this 135. And the chip is holding up wonderfully :D
 
Interests: badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger badger
 
Back
Top