aquasurf statement Q's

[ckuhndog77]

aquasurf statement Q's

I have two tunze 6100's and one 6055. Each 6100 is at opposite end of 6 ft tank and 6055 is on back wall in middle.

I have ACIII- so you can make up to 6 programs right?

Will this work - so that I can reduce amount of max pump at night by calling them programs 4-6?

TN1 = L 6100
TN2 = R 6100
NS1 = 6055

If Time > 00:00 Then TN1 ON
If Time > 00:00 Then TN2 ON
If Time > 00:00 Then NS1 ON
If Time > 08:00 Then TN1 PF1
If Time > 08:00 Then TN2 PF2
If Time > 08:00 Then NS1 PF3
Pmp MODE sd for PF1
Pmp Int 030/100 for PF1
Pmp OSC 03/05/00 for PF1
Pmp MODE Sd for PF2
Pmp Int 030/100 for PF2
Pmp OSC 00/03/05 for PF2
Pmp MODE sD for PF3
Pmp Int 030/100 for PF3
Pmp OSC 05/05/00 for PF3
If Time > 22:00 Then TN1 PF4
If Time > 22:00 Then TN2 PF5
If Time > 22:00 Then NS1 PF6
Pmp MODE sd for PF4
Pmp Int 030/75 for PF4
Pmp OSC 03/05/00 for PF4
Pmp MODE Sd for PF5
Pmp Int 030/75 for PF5
Pmp OSC 00/03/05 for PF5
Pmp MODE sD for PF6
Pmp Int 030/75 for PF6
Pmp OSC 05/05/00 for PF6


----------------

Finally, anyone got ideas on whether 1 6100 will work to make wave effect; or can I use both despite being on opposite ends of tank.

THANKS in advance for help!

 

[Deleted member 143833]

Yes, this looks good. I ended up using 2 6201s to make a good wave in my tank (also 6' wide). You may be able to get a small wave 1 6100 but not much of 1; it will depend on what else is in the tank to deflect water movement.