fixingstill
New member
ATO, Why do people even need a ATO switch?
I use a small power head to pump kalkwasser RO water to an adjustable float valve installed in the return pump baffle. I also installed a dual float switch there to watch the min and max water level. I also have a float switch at the bottom of the kalkwasser reservoir to watch when the water is used up. Then I use Apex programming to turn it on one minute every hr. If water is at the right level, the float valve would not even open. When the salinity is less than 33, it is turned on too.
Fallback OFF
Set OFF
If Time 00:00 to 00:01 Then ON
If Time 01:00 to 01:01 Then ON
If Time 02:00 to 02:01 Then ON
If Time 03:00 to 03:01 Then ON
If Time 04:00 to 04:01 Then ON
If Time 05:00 to 05:01 Then ON
If Time 06:00 to 06:01 Then ON
If Time 07:00 to 07:01 Then ON
If Time 08:00 to 08:01 Then ON
If Time 09:00 to 09:01 Then ON
If Time 10:00 to 10:01 Then ON
If Time 11:00 to 11:01 Then ON
If Time 12:00 to 12:01 Then ON
If Time 13:00 to 13:01 Then ON
If Time 14:00 to 14:01 Then ON
If Time 15:00 to 15:01 Then ON
If Time 16:00 to 16:01 Then ON
If Time 17:00 to 17:01 Then ON
If Time 18:00 to 18:01 Then ON
If Time 19:00 to 19:01 Then ON
If Time 20:00 to 20:01 Then ON
If Time 21:00 to 21:01 Then ON
If Time 22:00 to 22:01 Then ON
If Time 23:00 to 23:01 Then ON
If Output EMERGENCY = ON Then OFF
If Output ATO-LOW = ON Then OFF
If Salt < 33.0 Then OFF
I use a small power head to pump kalkwasser RO water to an adjustable float valve installed in the return pump baffle. I also installed a dual float switch there to watch the min and max water level. I also have a float switch at the bottom of the kalkwasser reservoir to watch when the water is used up. Then I use Apex programming to turn it on one minute every hr. If water is at the right level, the float valve would not even open. When the salinity is less than 33, it is turned on too.
Fallback OFF
Set OFF
If Time 00:00 to 00:01 Then ON
If Time 01:00 to 01:01 Then ON
If Time 02:00 to 02:01 Then ON
If Time 03:00 to 03:01 Then ON
If Time 04:00 to 04:01 Then ON
If Time 05:00 to 05:01 Then ON
If Time 06:00 to 06:01 Then ON
If Time 07:00 to 07:01 Then ON
If Time 08:00 to 08:01 Then ON
If Time 09:00 to 09:01 Then ON
If Time 10:00 to 10:01 Then ON
If Time 11:00 to 11:01 Then ON
If Time 12:00 to 12:01 Then ON
If Time 13:00 to 13:01 Then ON
If Time 14:00 to 14:01 Then ON
If Time 15:00 to 15:01 Then ON
If Time 16:00 to 16:01 Then ON
If Time 17:00 to 17:01 Then ON
If Time 18:00 to 18:01 Then ON
If Time 19:00 to 19:01 Then ON
If Time 20:00 to 20:01 Then ON
If Time 21:00 to 21:01 Then ON
If Time 22:00 to 22:01 Then ON
If Time 23:00 to 23:01 Then ON
If Output EMERGENCY = ON Then OFF
If Output ATO-LOW = ON Then OFF
If Salt < 33.0 Then OFF