Best settings for a pair of 6055's with a 7092 controller.

[Aslam Abraham]

Hello,need help getting the best settings for my pair of 6055's with a 7092 controller.Thanks in advance.

 

[shawnz28]

I would set them to alternate, likely from 100% to 30-40% in 3-4 second intervals and see how you like it. There really is no "best setting"

 

[Aslam Abraham]

I would set them to alternate, likely from 100% to 30-40% in 3-4 second intervals and see how you like it. There really is no "best setting"

Do you use the white lines around the dials to as a guide.Also,in night mode,do both lights on the controller switch on and off or does just one light stay on.Thanks

 

[rvitko]

In night mode, pulsing stops, speed 2 is where the pumps will stay, the settings got beyond the white lines, those are just general indicators, full counter clockwise is 30%, full clockwise is 100%.

 

[Aslam Abraham]

In night mode, pulsing stops, speed 2 is where the pumps will stay, the settings got beyond the white lines, those are just general indicators, full counter clockwise is 30%, full clockwise is 100%.

Thank's for your response,on the right hand side of the controller,below the feed mode button,there's a timer with a plus and minus button.Are these for only controlling a wavebox or these can also be used to control the streams.Thanks again.

 

[rvitko]

That is how you set the number of seconds between pulses, it is covered in the manual. A very short pulse turns to wavebox mode, a longer pulse is pulse mode.

 

[Aslam Abraham]

That is how you set the number of seconds between pulses, it is covered in the manual. A very short pulse turns to wavebox mode, a longer pulse is pulse mode.

I have the manual but don't understand,do I use a stopwatch to set the pulse time.Sorry for all the questions.

 

[rvitko]

You push the + or 1 button to increase or decrease the delay between pulses, .3-2 seconds is wavebox mode and 2-7 seconds is pulse mode. No stop watch required you just change it to get the effect you want.

 

[Aslam Abraham]

You push the + or 1 button to increase or decrease the delay between pulses, .3-2 seconds is wavebox mode and 2-7 seconds is pulse mode. No stop watch required you just change it to get the effect you want.

Thank's.