Cadlights 50G Artisan Cube Tank Build Thread

First of all your tank looks great. If you don't mind I would like to know what you think of the set up I am getting ready to buy as well as what you would do diffrently (if anything) equiptment wise if you were to start over. The set up I'm considering is:

Cadlights Artisan 50
Cherrywood stand
24" full LED system w/control w/lamp tree
Bubble-Magus Nac-6
Standard sump & plumbing
Stock return pump
Eco-Tech MP10

I would like to figure out some sort of top off system that would fit in the stand but am not sure if that will work. Any and all feedback would be appreciated.

Thanks
 
cmfowden5150 said:
First of all your tank looks great. If you don't mind I would like to know what you think of the set up I am getting ready to buy as well as what you would do diffrently (if anything) equiptment wise if you were to start over. The set up I'm considering is:

Cadlights Artisan 50
Cherrywood stand
24" full LED system w/control w/lamp tree
Bubble-Magus Nac-6
Standard sump & plumbing
Stock return pump
Eco-Tech MP10

I would like to figure out some sort of top off system that would fit in the stand but am not sure if that will work. Any and all feedback would be appreciated.

Thanks
Click to expand...


Your list looks good. What corals do you plan on keeping? I am not sure about the performance of the Cadlights controllable LED fixture. I have heard mixed things about it but if you are only going to have lps and softies it should be ok.

As for fitting a top off reservoir in the sump, I am not sure that is such a good idea. There is barely any room left in the stand after you put the sump in. If you do manage to fit a reservoir in their it won't be very large and you will probably have to fill it up every day anyway. Water evaporates a lot from this tank since it is rimless and open top.

Good luck!
 
The stocking list is still undecided but it will include some SPS. Supposedly the LED they sell is equivalent to a 250w MH? What other set up would you recommend? Do you think it is still too early to trust LED's.
 
Hey Richard, I finally got around to setting up my CAD50. I built a custom cabinet and sump/refugium. I went with the AI Sol Blue LED fixture for lighting.
50Cube002.jpg

006.jpg

008.jpg


I moved corals and livestock from my old JBJ 28 HQI into the tank.
 
Nice tank. I'm starting a 40 artisan I just picked up today from Eddie. Since they all sold out, he made me a custom furniture grade cabinet instead of the usual mdf. Wish me luck. A build thread might follow
 
cmfowden5150 said:
The stocking list is still undecided but it will include some SPS. Supposedly the LED they sell is equivalent to a 250w MH? What other set up would you recommend? Do you think it is still too early to trust LED's.
Click to expand...

No no I think LEDs are generally good and have been proven to be suitable lighting for reefs. The issue is the components of the LED fixture. A lot of people still don't seem to understand this. You can make a totally cheap LED fixture that won't be able to provide enough PAR for corals or you can make a high quality one with top notch components that can provide more than enough light.

As for the cadlights controllable fixture they don't really say what components they use and I have heard from other people that their claims of performance are not justified. But I dunno because they don't list their components...

thegrun said:
Hey Richard, I finally got around to setting up my CAD50. I built a custom cabinet and sump/refugium. I went with the AI Sol Blue LED fixture for lighting.

I moved corals and livestock from my old JBJ 28 HQI into the tank.
Click to expand...

Very nice! Great job with the stand! Do you have a build thread?


samuelkl said:
Nice tank. I'm starting a 40 artisan I just picked up today from Eddie. Since they all sold out, he made me a custom furniture grade cabinet instead of the usual mdf. Wish me luck. A build thread might follow
Click to expand...

Sweet, upgrading is always nice! You should definitely post a build thread! I still haven't seen your current tank yet.
 
cocoaandme said:
As for the cadlights controllable fixture they don't really say what components they use and I have heard from other people that their claims of performance are not justified. But I dunno because they don't list their components...
Click to expand...

So for this tank what would you reccomend as far as a LED fixture goes?
 
cocoaandme said:
I like the AIs but it really depends on what you are doing with the tank and what your budget is.
Click to expand...

From what I've seen and read I would need 2 AIs for this tank. Cost aside I'm not sure if I can get past the look. I was hopeing to find something that blended with this setup a little better.
 
cmfowden5150 said:
From what I've seen and read I would need 2 AIs for this tank. Cost aside I'm not sure if I can get past the look. I was hopeing to find something that blended with this setup a little better.
Click to expand...

One AI is enough, see the pictures of my tank earlier in this thread. I would say at the very top of the tank at the extreme front and back the light is weaker, but I would not use two fixtures. I have my light 12" above the water and run the lights at about 65% maximum.
 
Thegrun knows what he is talking about. I see a lot of people "pimping" out their tanks with more light and more flow than the corals actually need. I think it's more an obsession about having more than it is a consideration for the health and well being of the corals.
 
Well you have inspired me. I placed an order for this setup on Monday and it shipped Thursday.

Cadlights Artisan 50
Cherrywood stand
Ecotech Radion XR-30w LED w/lamp tree
Bubble-Magus Nac-6
Standard sump & plumbing
Stock return pump
2 ea Eco-Tech MP10w es
Ecotech battery backup
 
cmfowden5150 said:
Well you have inspired me. I placed an order for this setup on Monday and it shipped Thursday.

Cadlights Artisan 50
Cherrywood stand
Ecotech Radion XR-30w LED w/lamp tree
Bubble-Magus Nac-6
Standard sump & plumbing
Stock return pump
2 ea Eco-Tech MP10w es
Ecotech battery backup
Click to expand...

You won't regret it these tanks are really nice!!! I'm cycling mine now and saving up for my mp10w es!

And any updates on this setup? Or anything that you'd change or do differently?
 
cmfowden5150 said:
Well you have inspired me. I placed an order for this setup on Monday and it shipped Thursday.

Cadlights Artisan 50
Cherrywood stand
Ecotech Radion XR-30w LED w/lamp tree
Bubble-Magus Nac-6
Standard sump & plumbing
Stock return pump
2 ea Eco-Tech MP10w es
Ecotech battery backup
Click to expand...

I just ordered a 50g w/ sump the other day! Still in processing. I'm ordering the mp10's & radion on a vendor site that's doing a group buy!
 
You must log in or register to reply here.

Similar threads

J
WTB: 100-200g tank (ideally starfire glass)
Replies
1
Views
98
yoyoyoo123
yoyoyoo123
A
FS: Leemar Tank w/ Stand
Replies
0
Views
380
AQUA951
A
Pacman562
Anyone interested in a tank?
Replies
2
Views
352
Pacman562
Pacman562
TreyB381
200 gallon single 2” drain, how would you do it?
Replies
6
Views
410
Vinny Kreyling
Vinny Kreyling
M
40G Breed Sump Setup Advice
Replies
4
Views
260
Vinny Kreyling
Vinny Kreyling
Back
Top