Calcium Reactor

[Fabiano Pfeilsticker]

I have a Tunze Calcium Reactor, normally I turn it on and let the water
flow on the top of it, then I close, this way the water flows
trough the front pipe in a good volume. The problem is that after a while the water flow is considerably reduced, until it stops. What can I do to solve this problem?
PS: The "reactor" is under the water "until the superior mark.

Fabiano Pfeilsticker

 

[rvitko]

This is pretty usual with most calcium reactors, small pieces of stone and some algae and calcium sediment clog the nozzle. The best solution is to just readjust it weekly when doing the normal maintanence.