CalmSeasQuest's Blue Wall (96X30X22)

[CalmSeasQuest]

Over the past 20 years, I've built and kept a variety of smaller reef tanks including a series of rather “unique” desktop tanks including the Puzzle rock and CSQ Skimmer tank builds. I finally have an opportunity for a larger build. This system is being placed in the living of my home with ATO and AWC equipment directly below the tank in the basement. It should end up around 325 gallons. Here’s the current equipment list…

• Tank – GLA 275 (96" X 30 X 22) ½” Starphire, open top w/clear cross bracing fitted with a BeanAnimal style internal overflow (3X1.5” drains)
• Sump – GLA 72X24X18, 135 gallon glass sump, center return with 30X24 refugeum
• Lighting, Display tank – Planning 4-5X Kessil 360We, controlled by the Apex
• Lighting, Sump/Refugeum - YTBD
• Return Pump – Diablo DC 1050 @ 2600 GPH feeding return, refugeum and manifold
• Controller - Apex Aquacontroller, w/various modules.
• Skimmer – YTBD (considering Vertex Alpha 500 or SRO XP5000I)
• Calcium reactor – GEO 612 w/Tropic Eden and NeoMag. Aquarium Plants digital regulator
• Kalk Reactor – GEO KR-618 fed by ATO peristaltic pump.
• Saltwater Makup - 2X200 gallon Norwesco 30X72” tanks, fed and mixed by Diablo DC 1050 (backup for return pump)
• Auto Water Change - Litermeter III or Cole-Parmer Masterflex with dual pumps
• ATO – LiterMeter III or Osmolator using peristaltic pump.
• Water movement - 2X MP60ES
• Rock – BRS Pukani and shelf
• Substrate – 1.5”-2” Tropic Eden Reef Flakes
• Heaters – YTBD
• GFO/GAC – Dual jumbo BRS reactors running HiCap GFO and ROX .08 GAC as needed
• BioPellets - YTBD

The tank was ordered today, expected tank and stand build time about 6 weeks. There’s a lot to get done in the interim including,

- Relocate 2 existing tanks, remove hung LED lighting, repair and paint
- Remove carpeting, install emergency drain and tile tank area
- Complete water RO/DI storage, Saltwater mixing/and ATO station in basement

I expected to have to do some floor strengthening, but was pleasantly surprised to find it was not necessary. I had the tank location reviewed by a structural engineer. The tank will sit perpendicular to 5 2X10 joists spanning only 48” between the poured basement wall and steel I-beam. Nothing additional was recommended as the intended location will support 5500lbs.

Lots of decisions still pending including final decisions on lighting, overflow and sump design. I really like uncleof6’s sump/fuge design and plan on simply scaling it up for my needs. This will also be my first attempt as hard-plumbing. I figured I’d start with the saltwater mixing station hoping to make the beginner mistakes there rather than on the tank.

For those that might be wondering about the “Blue Wall” thread title – I’m planning on painting the wall behind the tank a cobalt blue (the rest of the room is white.) As the Kessil pendants put out an incredible amount of shimmer, and this tank is open-top, I’m hopeful it might turn the entire wall into an interesting, shimmery backdrop for the tank.

Thank you for taking the time to read this and for all the questions and advice I’ll no doubt be asking for.

 

[CalmSeasQuest]

One decision down - I've decided to go with the Cole-Parmer Masterflex pumps for the automated water changes. I've got a few laying around that I've collected over the years and it made sense to put them to use rather than acquiring a Litermeter III and the associated pumps. In addition, they are built like tanks - Compared to the 300 hour recommended service interval on the LM3, I've had one Masterflex pump in continuous service (feeding a calcium reactor) for about 5 years that continues to run like clockwork.

I'll use a 2 head unit for the continuous water change and a separate single for the ATO.

 

[smilonas]

Hi Tom,

In the first post, you mentioned removing currently hung LED fixtures. Are you planning on using these with the Kessils or repurposing them elsewhere?

Looks like a great build and can't wait to see the progress.

Stacy

 

[CalmSeasQuest]

Hi Tom,

In the first post, you mentioned removing currently hung LED fixtures. Are you planning on using these with the Kessils or repurposing them elsewhere?

Looks like a great build and can't wait to see the progress.

Stacy

Hi Stacy,

I plan on using just the Kessils (actual number of fixtures YTBD) mounted on goosenecks on this tank.

I've got a pair of AI SOL Blues and a Maxpect unit over a small DT and FT. Once moved, they will initially serve as temp QT tanks. After that, I'm not sure what I'll do with them. Now that I think of it, I've got a collection of LEDs from various testing done over the years, including a brand new Orphek pendant won in a build contest - perhaps a yard sale is in order

Speaking of LEDs, I'll also have to work out a lunar solution as the Kessils don't dim low enough for use as moonlights. Apex lunar module perhaps.

 

[CalmSeasQuest]

It seems I underestimated the amount of room these 200 gallon tanks and associated mixing/CTW plumbing was going to require. As a result, I've had to remove a series of storage racks and turn a rarely used second guest room in the basement into a permanent storage facility.

I completed a rough design and placed the plumbing orders from Savko, USPlastic and Cole-Parmer. It took far more hours to think through the saltwater mixing station design than I anticipated and then even more to figure out each individual plumbing component. No doubt it contains lots of newby-plumber mistakes, but I think it will be functional. I stepped down from the 2" tank outlet to 1 1/4 to match the inlet/outlet size on the DC 1050 pump. I'll post a picture (trying to develop some Sketchup skills) otherwise it will be simple drawing with hopes someone with more experience can critique.

The storage tanks should arrive next week - Let the plumbing learning curve begin

 

[CalmSeasQuest]

I've largely decided on the sump design, I'm going to enlarge the below uncleof6 design that will provide a 20X24X10 skimmer area, 18X24X9 for the return pump and 30X24X12 for a fuge/frag area. This should be about 75 gallons in operational volume and allow for about ~50 gallons in overflow when the return pump is off (I'll use a wye check valve on the return, but never trust them.)



All that needs to be added is a manifold and slight rerouting of the siphon and trickle drains to incorporate the occasional use of filter socks (or perhaps just the siphon as very little water will flow through the second drain.) I'll create a 5 tap manifold for the GFO, GAC and BioPellet reactors and a couple spares.

I think I've also changed my return pump selection, deciding to go with the Waveline 12000. It provides more flow and head pressure than the Diablo. The only inconvenience is the intake is larger (1.5") requiring some plumbing changes to the saltwater mixing station.

Still researching GFO, GAC and bio pellet reactors. I've had lots of flow issues with the BRS reactors over the years, so perhaps Vertex or NextReef MR1s. I'd like to use a manifold tap to drive the CaRx, but I've had such great luck with the Cole-Parmer - I'm not sure I want to fool with it.

I also decided on a Vertex Alpha 250 as it will run happily in 10" of water. Perhaps the greatest challenge will be fitting all the "Dry" equipment into the remaining 22X29 space in the cabinet.

 

[muttley000]

Sounds like you are going about things the right way. I look forward to your complete and well written updates.

 

[CalmSeasQuest]

Sounds like you are going about things the right way. I look forward to your complete and well written updates.

Thanks muttley I sure hope I'm doing it right - I can't afford many errors with ~350 gallons of saltwater cohabiting the living room

I know I can count on fellow RC'rs to point my mistakes as they occur.

 

[CalmSeasQuest]

As I sit here researching equipment for this build, It dawns on me....

We struggle, spending dozens of hours researching just the right LED's to reduce electrical needs and limit heat (at least radiant heat) from entering the tank...

We use the latest, most energy efficient DC pumps to save energy and reduce the amount of heat being added to the tank.

We use Killawatts to tabulate every watt leached by every ancillary device to create the most "green" environment possible, All so we can...

Buy MORE, LARGER, energy sucking HEATERS that are now needed to compensate for the missing Metal Halide heaters (poorly disguised as lights) and all the cold, energy sipping devices we just paid a huge premium for.

Somehow, with all the smaller tanks I've had over the years, it never really hit home. It's interesting what you pay attention to when you realize you how many Watts are needed to heat 325 gallons of saltwater :eek2:

And do so gladly I might add

 

[anbosu]

I guess the nice thing living up north is you could keep your tank at 72-75 year round if you wanted and save some money that way.

 

[CalmSeasQuest]

I guess the nice thing living up north is you could keep your tank at 72-75 year round if you wanted and save some money that way.

It wasn't so much the expense, rather the realization of the scale with a larger tank/system. I never even thought about having a few of 150W heaters in the tanks Somehow it struck me when planning on upwards of 800 Watts.

As for being up north, although we save on cooling during the winter, we spend on heating and still have to deal with summer air conditioning and dehumidifiers.

 

[anbosu]

It wasn't so much the expense, rather the realization of the scale with a larger tank/system. I never even thought about having a few of 150W heaters in the tanks Somehow it struck me when planning on upwards of 800 Watts.

As for being up north, although we save on cooling during the winter, we spend on heating and still have to deal with summer air conditioning and dehumidifiers.

Haha - yeah, that's one of the reasons I moved to Florida.

They sell some really nice in line titanium heaters now that might work for your system. I've seen them recommended on other threads, although I have to admit I don't remember the name. I'm sure someone on here knows what I'm talking about though.

 

[EddieJ]

It wasn't so much the expense, rather the realization of the scale with a larger tank/system. I never even thought about having a few of 150W heaters in the tanks Somehow it struck me when planning on upwards of 800 Watts.

As for being up north, although we save on cooling during the winter, we spend on heating and still have to deal with summer air conditioning and dehumidifiers.

I have 2 500 watt heaters in my 250 gallon system. I have them staged so the second one only kicks on during real cold days. My sump is in the basement as well. I am replacing my 3 MH lights with 3 Radion Pro's and I know my electric bill may climb in the winter months as a result. Now what I really am really interested is how your DC return pump will work. I currently have a PanWorld PS200 which is the power hog of the system since it runs 24/7. I did some calculations on head pressure and it seems the DC pumps may come up a little short.

 

[CalmSeasQuest]

RO/DI and Saltwater tanks are in place. Each hold 200 gallons (30"DiaX72"tall) I've started roughing out the plumbing and the Waveline DC12000 should get here Monday along with a few missing plumbing components.

I'm estimating ~7 GPD evaporation. I'll rig a latching float system with the Apex which will automatically fill the RO/DI tank. Other than monitoring and periodically changing RO/DI filters, resin and membranes, The ATO system should require very little maintenance.

The plan for the AWC is to use a Masterflex pump driving 2 peristaltic pumps to replace about 4 GPD. This should yield a ~40% monthly water change and require refilling the saltwater tank every 6~7 weeks.

I am having some second thoughts on the tank dimensions. I initially decided on limiting the tank height to 22" so I could reach the substrate with the tank sitting on a 36" tall stand. I'm now thinking that perhaps I should just go with the 320 and gain the additional 4" of height.

Decisions, decisions...

 

[dave.m]

36" tall :thumbsup:

Dave.M

 

[CalmSeasQuest]

36" tall :thumbsup:

Dave.M

LOL - Thanks Dave, but I think I'll stick with my original 58"overall height so I can leave my SCUBA gear in the closet when aquascaping.

 

[Brian Crook]

Love the plastic tanks! I got myself two 50 gallons of the same type.

Wish I had the space for some 200's lol

 

[CalmSeasQuest]

Love the plastic tanks! I got myself two 50 gallons of the same type.

Wish I had the space for some 200's lol

Thanks Brian,

I had just enough room to shoe-horn these in. I wanted the very largest tanks possible to minimize ongoing maintenance.

After much deliberation, I committed to the Kessils A360WE's and took advantage of a 10% off coupon through ReefGeek (not to mention the things are sold out most everywhere else.) With my shallow depth and the additional 15% output from the new "E" models, I'm hopeful they will end up being a great choice.



5 - A360WE Controllable LED Aquarium Light - Wide Angle Lens
5 - 90 Degree Gooseneck Adapter
1 - Control Unit Link Cable for A360 and A360W to Neptune Systems Apex
5 - Control Unit Link Cable for A360 and A360W KSL0103
5 - Gooseneck Clamp/Mount for A150, A350, and A360

I ordered 5 to begin with to see what 1 unit every 18" looks like. The gooseneck adapters should give me the ability to "stagger" the lights if needed to cover the 30" front/back.

Still searching for the Vertex Alpha 250 as they appear to be pretty scarce. Took advantage of other year-end sales and grabbed 4 cases of IO/RC, 300lbs of Tropic Eden Reef Flakes, another Apex system (so I don't have to cannibalize my existing setup which will be used as QT/hospital tank) and a second Waveline 12000 (same pumps used for return and saltwater mixing station.)

I also decided to roll the dice and try the Jaebo WP series pumps. I ordered 4 60's, and a couple 40's and 10's to test.

 

[SPotter]

Looks good Tom. Who is building the tank and why only 1/2" glass? Every glass tank builder I spoke with about doing an 8ft tank wouldn't use anything less than 3/4".

 

[tdb320reef]

Looks good Tom. Who is building the tank and why only 1/2" glass? Every glass tank builder I spoke with about doing an 8ft tank wouldn't use anything less than 3/4".

I used the same builder for my 320 and yes it is 1/2. No problems so far going on 2 years.