MarineGirl411 New member Nov 20, 2009 #1 Just wondering if it would be safe to reuse bulkheads? Please let me know. TY
L leeit2me Member Nov 20, 2009 #2 As long the bulkhead rubber gasket is not brittle or deteriorated, it should be fine to reuse again.
Laddy New member Nov 20, 2009 #3 just replace the teflon tape around the threads too, and you're good to go.....life time of use out of them!
just replace the teflon tape around the threads too, and you're good to go.....life time of use out of them!
jollyballs New member Nov 20, 2009 #5 i would make sure the rubbers are clean before you install them.
bllfish New member Nov 20, 2009 #6 jollyballs said: i would make sure the rubbers are clean before you install them. Click to expand... NAH - too easy:lolspin:
jollyballs said: i would make sure the rubbers are clean before you install them. Click to expand... NAH - too easy:lolspin:
M marve467 New member Nov 21, 2009 #7 :furious::furious: jollyballs said: i would make sure the rubbers are clean before you install them. Click to expand... ya otherwise you could get a serious infection.
:furious::furious: jollyballs said: i would make sure the rubbers are clean before you install them. Click to expand... ya otherwise you could get a serious infection.
am3gross New member Nov 21, 2009 #9 make sure the threads are tight as well... i had one where the threads were worn and it would not tighten up as much as needed...
make sure the threads are tight as well... i had one where the threads were worn and it would not tighten up as much as needed...
Harpo1966 New member Nov 21, 2009 #10 bulkheads bulkheads I have reused mine many times. I also suplement with silicone just to make sure. David
bulkheads bulkheads I have reused mine many times. I also suplement with silicone just to make sure. David