hey everyone I built a chiller for a friend a couple years ago and he sold his tank about 7-8 months ago and I bought the evaporator coil and dual stage ranco controller from him in anticipation for installing it on my own system. I went a different route with the tank and will not be installing a chiller so I am just going to get rid of it to get my money back.
the evaporator / titanium chiller barrel is being sold for $175 . titanium is titanium and is in perfect condition and so is the pvc. a little dusty is all. the stainless mount has been splashed with some saltwater and has started to rust. it can be cleaned up some and is perfectly useable just not pretty. this barrel is for a 1/2h.p. / ton chiller and would work down to around 1/4hp up to a 3/4 hp. your metering device and water flow determine proper pressures.
[/IMG]
next I have a dual stage ranco temperature controller. it is in good shape. it has the probe and a cord seal that is 1/2 inch male pipe thread for mounting the probe or it can be thrown away and the probe laid in the sump. it has an approximate 6 ft power cord a heat 3 way plug so you don't need an extra power strip for heaters and the cooling lead is only a cut cord. it was wired directly to the condenser so we just cut it clean since it would have to be rewired or a plug end put on. that is up to the buyer. $75 firm.
[/IMG]
I will take less only if the person buys both items together on the same day. bring cash, be serious and make an offer.
thanks to everyone looking.
the 1/2 ton coil is an s w wilson coil listed on there site for $300 plus shipping.
the evaporator / titanium chiller barrel is being sold for $175 . titanium is titanium and is in perfect condition and so is the pvc. a little dusty is all. the stainless mount has been splashed with some saltwater and has started to rust. it can be cleaned up some and is perfectly useable just not pretty. this barrel is for a 1/2h.p. / ton chiller and would work down to around 1/4hp up to a 3/4 hp. your metering device and water flow determine proper pressures.
next I have a dual stage ranco temperature controller. it is in good shape. it has the probe and a cord seal that is 1/2 inch male pipe thread for mounting the probe or it can be thrown away and the probe laid in the sump. it has an approximate 6 ft power cord a heat 3 way plug so you don't need an extra power strip for heaters and the cooling lead is only a cut cord. it was wired directly to the condenser so we just cut it clean since it would have to be rewired or a plug end put on. that is up to the buyer. $75 firm.
I will take less only if the person buys both items together on the same day. bring cash, be serious and make an offer.
thanks to everyone looking.
the 1/2 ton coil is an s w wilson coil listed on there site for $300 plus shipping.
