Clearly i am missing something easy

[Tank14]

I am trying to replace my bulbs in my current orbit 2x150 MH 2x130 PC fixture. I am stuck on removing the PC bulbs. I can get the lamp clips off but I do not know how to remove the bulb out of the socket. I don't know if they just pull out or if something has to be unclipped . I should have checked when I first got the fixture, but I didn't think about it at the time. Does anyone know how to remove the bulbs? Thanks!

 

[Jacwil]

Just wiggle them back and forth and pull the lamp out Chris. They may be stuck a bit but steady pulling and shifting back and forth should do it bud.

 

[magdelan]

Just wiggle them back and forth and pull the lamp out Chris. They may be stuck a bit but steady pulling and shifting back and forth should do it bud.

If I remember correctly, PC's are just pins at one end with a cord. Wiggle, wiggle, wiggle... and if that wont work, a tack hammer will

 

[zooman72]

I have even used a small screwdriver coupled with a little WD-40 to pry them apart - I hated those pins in the old 12" and 30" Coralife PC fixtures I used to use!