I have a 160 starfire euro brace setup for close loop with all the piping and values. Also has a steel stand.
I purchased from a fellow reefer a few years back but found out I could get it in the house.:headwally:
Sorry no picture right now
In San Francisco
Looking to get $600 or cash and trade for sps, dosing pump, etc
50"x28"x28" Reef Ready Aquarium
q Glass @ 28" tall
q 1" Styrofoam
q ½" plywood
q Trim "“ top and bottom
q ½" Starphire sides and front
q Exposed edges polished
q Polished Starphire EuroBracing (about 4")
q Eurobracing drilled for Sea-Swirls (see diagram)
q Black silicon
q Black indicoat mirror back
q ¾" Bottom
q Two auxiliary 1.5" bulkheads installed in bottom (in addition to overflow)
o 8" forward from back glass (see diagram)
Corner overflow (approx 18"x7")
q Greylight
q Left corner
q Two 2" low-profile installed threaded bulkheads (3" hole)
o Drains; must accommodate 2" Durso Standpipes
o Please include street elbows
q One 1.5" threaded installed bulkhead (2 3/8" hole)
o Return line
o Two 1.5" T's out side of overflow (see diagram)
§ Threaded bulkheads so can be plugged
§ Lower T's upper bulkhead height @ 12" from bottom
§ Upper T's upper bulkhead height @ 22" from bottom
o Upper T at top of return line so can be capped or extended
q Eurobracing must not interfere with bulkheads/Durso standpipes
o If this causes overflow to be moved forward more than 7" please phone
q Black eggcrate
q Polished exposed edge
28" Tubular steel stand
q Steel @ 28"
q Plywood bottom
q Powdered coat protection
q Glass basin with drain
o Waterproof
o Polished
o 3" Drain (received with these instructions) installed (see diagram)
Let me know if your interested since its buried in my garage.
Pm if your interested.
I purchased from a fellow reefer a few years back but found out I could get it in the house.:headwally:
Sorry no picture right now
In San Francisco
Looking to get $600 or cash and trade for sps, dosing pump, etc
50"x28"x28" Reef Ready Aquarium
q Glass @ 28" tall
q 1" Styrofoam
q ½" plywood
q Trim "“ top and bottom
q ½" Starphire sides and front
q Exposed edges polished
q Polished Starphire EuroBracing (about 4")
q Eurobracing drilled for Sea-Swirls (see diagram)
q Black silicon
q Black indicoat mirror back
q ¾" Bottom
q Two auxiliary 1.5" bulkheads installed in bottom (in addition to overflow)
o 8" forward from back glass (see diagram)
Corner overflow (approx 18"x7")
q Greylight
q Left corner
q Two 2" low-profile installed threaded bulkheads (3" hole)
o Drains; must accommodate 2" Durso Standpipes
o Please include street elbows
q One 1.5" threaded installed bulkhead (2 3/8" hole)
o Return line
o Two 1.5" T's out side of overflow (see diagram)
§ Threaded bulkheads so can be plugged
§ Lower T's upper bulkhead height @ 12" from bottom
§ Upper T's upper bulkhead height @ 22" from bottom
o Upper T at top of return line so can be capped or extended
q Eurobracing must not interfere with bulkheads/Durso standpipes
o If this causes overflow to be moved forward more than 7" please phone
q Black eggcrate
q Polished exposed edge
28" Tubular steel stand
q Steel @ 28"
q Plywood bottom
q Powdered coat protection
q Glass basin with drain
o Waterproof
o Polished
o 3" Drain (received with these instructions) installed (see diagram)
Let me know if your interested since its buried in my garage.
Pm if your interested.
