Connecting to Apex Jr.

ponokareefer

New member
I am having trouble connecting to my Apex Jr. on my computer. I have connected it to my work network and tried typing in http://192.168.0.50 with no luck. I have not changed any of the defaults on the Apex Jr..

I have used the command prompt and ipconfig to find out that my default gateway is 192.168.0.1, which is the same as my Apex Jr..

Also, my subnet mask is the same, 255.255.255.0.

I have also tried adding :80 to the end of the address(http://192.168.0.50:80) with no luck as this is what the HTTP is reading.

I have tried restarting the Jr. a couple of times as well.

What do I try from here?
 
Can you ping it? Can you go to Setup-> Network on your Display and verify the network settings?
 
If it's hardwired, might try a different cable from the apex to the router. If it's WiFi, might hardwire it until you get it working.
 
Are both the yellow light and green light on the apex base unit lit?

Edit: The ones near the network port.

Running out of ideas here.
 
Last edited:
You said it's a work network. Could your admins have set up some firewall rules in your network to block certain ports or address ranges on your LAN?
 
Is 192.168.0.50 the address of the Apex as shown in the display menu? Go to System->Net Setup-> IP Address to see.
 
I disconnected the cable and restarted the system and reconnected it. It gave me a different IP address, 192.168.0.103 for some reason. It is working now. Thank you for everyone's help.
 
Back
Top