aerius007
New member
OK, I want to flush my RO membrane. I have a 4 stage unit, water goes through the first two stages and into to ro membrane housing with a yellow tube. From the ro membrane (3rd stage) there is a red tube and a blue tube. The red tube is waste water and the blue tube goes into the DI resin. Here are the instructions from coralife on how to flush the membrane.
"Membrane efficiency and life expectancy may be improved by flushing the membrane regularly. The easiest way to achieve this is to switch the two outlet fittings on the bottom of the membrane housing. By placing the wastewater fitting (red tube) in the purified water outlet and the purified water fitting (blue tube) in the wastewater outlet, the system can be flushed. After switching the fittings, the unit should be operated for approximately 15 minutes."
Their instructions only have the two outlets switched, what the heck would that do other than putting my waste water through the DI resin? Either Coralife and drsfostersmith.com have the wrong instructions or I'm totally missing something.
"Membrane efficiency and life expectancy may be improved by flushing the membrane regularly. The easiest way to achieve this is to switch the two outlet fittings on the bottom of the membrane housing. By placing the wastewater fitting (red tube) in the purified water outlet and the purified water fitting (blue tube) in the wastewater outlet, the system can be flushed. After switching the fittings, the unit should be operated for approximately 15 minutes."
Their instructions only have the two outlets switched, what the heck would that do other than putting my waste water through the DI resin? Either Coralife and drsfostersmith.com have the wrong instructions or I'm totally missing something.