Anybody out there experienced with the AC jr and willing to help??? I had this thing sitting in a box for months. I tried buts its like reading another language. I will gladly pay in frags!!!!! Thanks Ben
Do you have aquanotes? It makes life so much easier. I don't have experience with aquasurf but can help a little on the the controller. It isn't too bad once you get a few commands programmed. I did my lights first and once i had them figured out the rest fell into place. Let me know. Maybe one night early this week I can do what I can for ya, if no one else with more experience can help. scott
I can help here is my very simple program as an example:
If Time > 13:30 Then HQI ON (turns main lights on at 1:30 PM)
If Time > 20:30 Then HQI OFF (turns main lights off at 10:30)
If Time > 07:30 Then ACI ON (turns actinics on at 7:30am)
If Time > 22:00 Then ACI OFF (turns actinincs off at 11:00pm)
If Temp > 81.0 Then FAN ON (turns fans on if temp get above 81F)
If Temp < 80.0 Then FAN OFF (turns fans off if temp below 80F)
If Temp > 82.5 Then HQI OFF (turns lights off if temp is above 82.5F)
Max Change 030 M Then HQI ON (if temp above 82.5 lights are off for 30 minutes then restarted)
If Time > 00:00 Then PUM ON (this function turns equipment on automatically regardless of time)
If Time > 00:00 Then BLU ON
If Time > 00:00 Then PHL ON
If Temp < 78.0 Then HEA ON
If Temp > 79.5 Then HEA OFF
If Time > 00:00 Then PHR ON
If Time > 00:00 Then HEA ON
Here is the equipment list:
PHR$-A1 (powerhead right)
PHL$-A2 (powerhead left)
HEA#-A3 (heater)
FAN#-A4 (fans)
PUM%-A5 (main circulation pump)
HQI%-A6 (MH HQI's)
ACI&-A7 (Actinics)
BLU&-A8 (Blue LED moon lights)
<a href=showthread.php?s=&postid=12156395#post12156395 target=_blank>Originally posted</a> by sohal1025 I was also looking into the same controller. What are those aquanotes all about and where do you get them from?
Aquanotes is a software program that interfaces with the Aquacontrollers. There are 2 versions Aquanotes Lite and the full Aquanotes. Aquanotes Lite is free from the Neptune website and the full version is available through any Neptune dealer. With the software you can program the controller monitor and graph your tank conditions etc. With the software it make programming the controller much easier.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.