Reef Junky
New member
Air water ice ro/di into container then to my ato float valve in sump. Add kalk +2 when ph drops off via union and walk away. Simple and effective.
Diy kalk doser/reactor
- Thread starter Reef Junky
- Start date
Reef Junky
New member
Air water ice ro/di into container then to my ato float valve in sump. Add kalk +2 when ph drops off via union and walk away. Simple and effective.
cool build!
Reef Junky
New member
Has been running for 5months with no problems. Only thing I may change is a circ pump in the future so I don't have to shake it everyday.
scubadan206
Member
Put in a small pump and program it like a dosing pump. [If you have an Apex or similar].
I have a 20 gal set up for this. Kalk creates a film on top that keeps CO2 out, and the PH up on the solution. The pump goes on for 5 min every 3 hours.
I'm always weary when someone hooks up the RODI unit to the ATO float switch.
Daniel. :spin3:
I have a 20 gal set up for this. Kalk creates a film on top that keeps CO2 out, and the PH up on the solution. The pump goes on for 5 min every 3 hours.
I'm always weary when someone hooks up the RODI unit to the ATO float switch.
Daniel. :spin3:
