what happens when a return pump runs dry? Does it have an auto shutoff to prevent the motor from catching fire?
FWIW....I have an Eheim and just curious.
Some have tharmal overloads. But if the pump runs dry it will cause pump damage. 90% of the pumps we use are magnetic driven. There is no worry of pumps catching on fire.
It can mess up the impellers on mag drive pumps if they are run dry. I doubt an Eheim will really overheat since it can be mounted externally so it doesn't need water to carry the heat away (although I guess it could if the impeller causes enough friction banging around inside the pump).
<a href=showthread.php?s=&postid=14287587#post14287587 target=_blank>Originally posted</a> by ONEWAY Some have tharmal overloads. But if the pump runs dry it will cause pump damage. 90% of the pumps we use are magnetic driven. There is no worry of pumps catching on fire.
I understand the worries first hand! Im triple checking everything from now on! Just be sure if you smell something faint that smells like burning plastic find where its coming from ASAP! Ive been reading up on some well pump switches that work like a float switch that will cut off the pump if the water level goes down to far.
You talking about a float switch? I don't know of one that goes inside a well. I do have a float switch hooked up to my aquacontroller that will shut off my main pump if the water level drops too low.
Speaking of things to shut off well pumps, the cool thing now is a pumptec box that senses the drop in amps when a pump sucks some air and it shuts the pump off for a set amount of time. Even better, the pump I have in my well is a variable speed pump and the control box will sense when the pump sucks air and it will shut it off for a certain amount of time depending on how long it ran before. Sorry, talking about work again.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.