EuroReef Club

Status
Not open for further replies.
my Sedra 3500 doesn't start back up after unplugging and cleaning. I have to stick my hand over the intake of the pump to jump start it. I have no idea why this works, but it does.

Any ideas on how to fix this problem?
 
i havent been on this thread since ive gotten my skimmer.


i have had the same problems with my pump and stuf as NEW school has.. I mesed with the pump and it stopped. However my pump even after having the impeellar replaced once has been actin really weird. I prob need to get a replacment pump or have EURo reef look at it .
 
Has anyone put a sedra 9000 pump on the RS135 body. I was thinking of doing so, I am planning on lowering the return somewhat to compensate from the extra waterflow.
The reason I want to do that is because I have a 150g tank, and I think the 135 is undersize. I purchased a RS180 but that body wouldn't fit into the sump. So I am thinking either using the GenX pump that I got from the 180 and put it in or a similar size pump in hope to increase the performance of the skimmer.
 
I was just wondering if anyone has put an euroreef modded eheim on a rs180 instead of using the gen x 4100. I'm thinking about doing this and just wanted to get some opinions.
 
<a href=showthread.php?s=&postid=10230710#post10230710 target=_blank>Originally posted</a> by skwirl
i had a cs6-2 that had a sedra 5000 on it, and i liked it pretty well.. it was nowhere near overpowered though. if thats what your worried about then dont worry at all. i now have a cs8-2 that had a sedra 5000 on it that i just sold. i took that sedra off there, and put a modded octo 3000 on it, and OMG!! i loved it. then i did the recirc mod on it, and i now have the skimmer i have been waiting for.
Click to expand...

Thanks for the feedback. I don't know why ER didn't put the 5000 on the skimmer to start with. I've ordered a pump, and hope it's not $$$ that I could have spent on another skimmer....
 
I want to say thanks to EuroReef Tec1, for supporting this thread, and answering questions.

I think it shows a lot about a compnay that goes to such lengths to help keep their customers happy.

The next skimmer I buy,(other than my new RS80) will be a euro-reef!
 
EuroReef Tec 1 your PM box is full.

I have an older Es-6 ( it think), I have been thinking about adding a drain and was wondering if I would need a special drill bit. Is it possible to drill into the side of the cup w/out cracking the cup, if so, how? Thanks in advance.
 
While it's hard to criticize here, after not having anyone from ER representing on RC for quite some time....

I have to finally mention that it can be quite frustrating to see interesting questions asked, discussed, only to have a final "PM sent" as the solution. Please remember, for most questions being asked here, there are probably a number of people hoping to see some response, whether it is for solving their own problems or just gathering ideas.

Would really love to see open discussions here in this thread where appropriate. Just my 0.02.
 
<a href=showthread.php?s=&postid=10240223#post10240223 target=_blank>Originally posted</a> by johns
While it's hard to criticize here, after not having anyone from ER representing on RC for quite some time....

I have to finally mention that it can be quite frustrating to see interesting questions asked, discussed, only to have a final "PM sent" as the solution. Please remember, for most questions being asked here, there are probably a number of people hoping to see some response, whether it is for solving their own problems or just gathering ideas.

Would really love to see open discussions here in this thread where appropriate. Just my 0.02.
Click to expand...

I agree. However RC may feel differently.

A while back, IIRC, Jeff was asked to not post in this thread.

I don't know why for sure, but probably because other vendors pay for a forum to discuss user issues, and for Jeff and or ER to use this thread as a medium to discuss their products, its not quite fair to the other sponsors.

This may possibly be why you see PM's being sent.

Jim
 
<a href=showthread.php?s=&postid=10240412#post10240412 target=_blank>Originally posted</a> by EuroReef Tec1
Jim PM sent

LOL :D
Click to expand...

Yeah, I figured as much.... :lol:

Cheers Clay, and have a good weekend.

Jim
 
So far I am completely unsatisified with my RS80. No bubbles in the chamber at all. No foam at all. Was told it might be the magnet. Hopefully the new magnet gets here soon. I hope that is all that is wrong. I have only had it for a week with 0 results. Everyone kept pumping this skimmer up and I am waiting to jump on the bandwagon.
 
Status
Not open for further replies.

Similar threads

Radicaljbr
Monitoring and dosing
Replies
2
Views
249
ReefKG
ReefKG
machodik
My Tunze 6095
Replies
9
Views
433
machodik
machodik
U
Goniopora
Replies
3
Views
179
Uncle99
Uncle99
jay505
Is STARS still an active club
Replies
3
Views
884
griss
griss
Dr. Reef
Affordable Aquaria by Dr. Reefs Black Friday Sale
Replies
0
Views
199
Dr. Reef
Dr. Reef
Back
Top