Euroreef RS-250 skimmer - $220

[raynist]

Excellent condition, rated for 250g, comes with everything including a gate valve.

Uses a GenX 6100 needle wheel pump.

Paid $450+ new.

Here is a picture:

 

[bmiller1234]

Ray, did you get my PM?

 

[raynist]

I did, and a sent a long response, you didn't get it??

 

[raynist]

Bump, $200 if you pick up this week.

 

[Yinzer]

Ok let me talk to the boss!

 

[Yinzer]

It's a go. When will you be around this week?

 

[raynist]

I am home any night this week

just make sure you have enough room for this as it is pretty tall. Will get an exact measurement shortly.

 

[raynist]

Here is the exact skimmer:

http://www.aquacave.com/detail.aspx?ID=1325

it is 30 inches tall and requires zero clearance to remove the cup.

 

[Yinzer]

Uuugh, too tall. I have about 25.5" clearance and that is cutting it close.

 

[raynist]

There is a guy selling the rs180 on the selling forum for the same price, or take a look at levichars.

 

[Yinzer]

i cant find the sellers forum

 

[AHDOnline]

The main sellers forum on RC is here:
http://reefcentral.com/forums/forumdisplay.php?f=2

 

[AHDOnline]

Levi's post is here:
http://reefcentral.com/forums/showthread.php?t=1764033

Dims of this one are:
Dimensions: 9" x 5.25" x 20" (requires an additional 1" for removal of collection cup)

 

[Drone]

You have to be approved to access the selling forums. I think it's a combination of time on the boards and number of posts.

Good luck,
Kevin

 

[raynist]

Here you go

http://reefcentral.com/forums/forumdisplay.php?f=2

 

[NaClH2Opgh]

With him it's going to be the 50/90 rule. You can't even see the selling forum unless you have both 50 posts and a member for 90 days.

 

[raynist]

Oh, I thought you could at least read it, but not post.

 

[bmiller1234]

I could fit the 250 in my stand....

Ray, does it take the same footprint as the 180 I just got off you? If so I have plenty of room for it, although I did pay 240 I would be willing to trade for the 250 and you can have the 180 with the eggcrate stand for it and sell to yinzer? I did redo the elbow off the pump to lower the skimmer about 1/2inch and tuck against the housing so I didn't need flex hose but I do still have it if yinzer would need it. I can take it out of sump and meet you at your office tomorrow afternoon with it if you want.

Yinzer, would you be interested?

Ray would you be interested?

 

[raynist]

Yep, same footprint and same pump, it is just 6 inches taller.

I am up for that if he is.

I will not be in the office until Friday though.

--Ray

 

[Yinzer]

Yes I'm all for it. I'm hurting with the P.O.S that I am using now!