ez's aquapod

[ezcompany]

Skimmer

Crocea

Vanuatu liverock

 

[calvin415]

Very nice, just a word of advice... Get the GSP's isolated before they take over... I had mine overgrow my zoo's even, it was sad growning over each polyp strangling each one.

 

[tangov559]

nice....how much would you be able to see your skimmer if there were no chambers...im planning to get a 65 for my 20gallon regular....how much would i see of the skimmer part in the tank?

 

[super-cichlid]

.

 

[super-cichlid]

.

 

[super-cichlid]

tank looks awsome!

question though: Don't clams need a sand bed?

 

[ezcompany]

the skimmer is HOB. skimmer pump has to be close to the surface for maximum air bubbles.
crocea clams do not enjoy the sandbed and prefer liverock to attach themselves on.

 

[ShY]

Nice looking tank.
What mods/upgrades(I see the MH ) have you made to your AP?
Also how long has this bad boy been set up for?

 

[ezcompany]

thank you cichlid calvin and shy~

mods are:
-MJ1200 in place of stock
-MJ900 upper left corner with hydor
-Minijet 606 first chamber very bottom pointing towards the second chamber to eliminate dead flow
-50 micron 2" x 2" foam pad right after surface skimmer grate area (intake) to act as a mechanical filter (cuts debris)
-small bag of phosban in chamber 2 to help fight against algae
-coralife super skimmer in chamber 1, usually turned on during the day shut off during the night
-the halides are 150 hqi, not the 70

set up for roughly 1 and a half months now, almost 2, i'm not sure!

my next addition is probably going to be a RBTA at the left side of the tank. what do you guys/girls think?

 

[ezcompany]

<a href=showthread.php?s=&postid=7554966#post7554966 target=_blank>Originally posted</a> by tangov559
nice....how much would you be able to see your skimmer if there were no chambers...im planning to get a 65 for my 20gallon regular....how much would i see of the skimmer part in the tank?

you'll see a good part of it. the pump part, around 6 inches long and 3-4 inches wide, and the tube its attached to. since it has to stay close to the surface it wont be that intruding.

 

[ezcompany]

added a sps recently from a buddy (thanks Ronald), my first sps. some sort of acro. if he does well i'll start with montis!

 

[ezcompany]

http://www.nano-reef.com/forums/index.php?showtopic=86752&st=40

Can someone identify the SPS for me please?

 

[PotysGSXR]

Nice looking tank mang