F/S F/T: Misc Stuff and then some

[ademster]

I have stuff for sale.

I have a 1/3 hp chiller $200

Current USA 1/3 HP Prime Inline Modular Aquarium Chiller Model 2606
Retail $999.00
Prime Modular Chillers

Take control of your aquarium with Prime, the world's first chiller to offer a heater and ultraviolet sterilizer as modular upgrades. Integrate the elements you need and leave out the ones you don't for a single system that will help stabilize things, both in and around your tank.

Features:
Highest BTU rating in the industry
Removes clutter - integrated design
Ultra-quiet motor
All units include ABS cover and digital temperature controller
Single Stage Thermostat
The Ultimate Stress Reducer for you and your fish

Cool, heat and sterilize with just one device. The Prime Chiller will not only keep your tank buddies cool on those hot summer days, but also incorporates sterilization and heating for the ultimate in stress reduction. Expansion port can accommodate a UV sterilizer or heater and give you the freedom to upgrade at your pace.

Heat Removal Machine

Super quiet, high efficiency compressor from Matsushita delivers more BTU's than any comparable chiller on the market today. The manifold evaporator design forces water to pass through each component's chamber, maximizing its efficiency. The corrosion resistant evaporating coil efficiently transfers heat and can be used in both fresh and salt water.

Intelligent Design, Inside and Out
Internal View of Prime Modular Chiller →

The unique chassis design integrates structural supports for strategic placement of the compressor, fan, evaporator and condenser, maximizing thermal efficiency and ensuring a safe and sound arrival. A 255 CFM fan with composite blade effortlessly and quietly draws cool air over the heat producing components, then exits through side and front louvers of the stylish black contoured housing. Cool features, with capacity to spare, make this the Prime candidate for your cooling needs.

Current USA 1/3 HP Prime Inline Modular Aquarium Chiller Model 2606 Specifications:
4,524 BTU's
Offers 12-22 (gpm) flow
Runs efficiently between 60 F to 80 F Temp Range
7.41/120 Volts
Has 1" FIPT Inlet/Outlets
Dimension is 17.5" x 11" x 15.5

3 of these Big Boy Meanwell Drivers HLG185-42B
$75 each or $200.00 for all three

Product Description
Retail $115.00Ea

Good dimmable driver for larger projects running parallel strings of LEDs

2.2 ~ 4.4A current range
Dimming circuit is compatible with 1-10V, PWM, or resistors
Max 42V DC Voltage (runs ~1-12 LEDs)
100% full burn-in test
18 month warranty
This is a specialized dimmable driver for large projects
Parallel LED strings must be identical
Most likely uses would be powering 60 LEDs @ up to 880mA (5 strings of 12) or powering 72 LEDs @ up to 733mA (6 strings of 12)

Rapid LED PWM DDC-01 Driver Controllers
$40 Each.


Lifeguard Aquatic FB-600 Fluidized Bed Filter
$20.00

Due to its unique shape, the Lifegard Fluidized Bed Filter is an extremely efficient, high capacity "biological" filter. Aquatic organisms excrete toxic ammonia as a metabolic waste product with additional ammonia produced as food and other organic matter breaks down and decomposes. This toxic ammonia (NH3) is converted to another toxic compound nitrite (NO2) by the Nitrosomonas species of bacteria. The nitrite is then converted to a relatively non-toxic compound called nitrate (NO3) by the Nitrobacter species of bacteria. This process is known as "nitrification".

A "biological" filter is a vessel where nitrification occurs and soluble waste is removed. Beneficial bacteria attach to the media within the Lifegard Fluidized Bed Filter creating a thin film around the sand grains. Water is pumped up through the unit lifting the sand into a "fluidized bed". The beneficial bacteria attached to the media draw in dissolved wastes (ammonia and nitrite), oxygen supplied by Lifegard Aquatics' exclusive water fall device and other required nutrients from the passing water converting them to relatively harmless nitrate. The sand grains are in continual free fall through the water resulting in an excellent transfer capability between the liquid and the bacterial film on the media.

The enormously high surface area combined with this excellent transfer capability creates the perfect habitat for bacterial growth. In addition, the sand grains bump into each other frequently knocking off excess debris and providing a self-cleaning function which allows new areas for bacterial growth. The Lifegard Fluidized Bed Filter has been tested and proven to supply the highest level of effluent water quality and will respond quickly and efficiently to severe changes in ammonia levels caused by over feeding or the addition of too many fish at one time. To obtain highest water quality a Lifegard Fluidized Bed Filter should be part of the system.

Specifications:

Tank Size: up to 600gal (2280L)
Surface Area: 428ft2 (38.52m2)
Dimensions: 3" x 7.5" x 26.75"
Weight: 6lbs (2.70kg)

BRS Kalk 1 gal? jug, Never been used.
$20.00

Two dual 48" t5 lights, both work great. Made by Coralife

Would like $25ea
I will add more stuff as I come across it.

 

[ademster]

Bump, make offer

 

[ademster]

Bump

 

[ademster]

Please make offer, need gone

 

[coralreefjunkie]

Awesome deals. Sweet! I will get the pair of T5 fixtures. I think they will complement well with my existing LEDs, similar to Jason's LED fixture.

Mark, were you looking for some Kalk? Let me know, I can pick it up From Adam when I pick up his lights.

 

[ademster]

Kalk, and dual bulb 48" lights sold.


adding brs dual reactor. used for 1 month. cleaned and ready to go.
$40.00


Other items still for sale.

 

[ademster]

Make offers

Adding a scratched 100gal acrylic tank euro braced has 1 corner over flow.
Perfect for huge fuge

$100

 

[zrogst]

Whats the dimensions on the scratched up acrylic 100g?

 

[brian cummings]

how thick is the acrylic on the 100 gallon?

 

[ademster]

it's 1/4 inch thick


I will get dimensions.

if I remember it is 60 x 18 x 20

 

[007Bond]

I see it was May since last posts. Do you still have the sand filter for sale?---Rick

 

[ademster]

yes.

 

[007Bond]

Ok, guess it would come down to if you would ship it, and how much to send to zip 43560. Oh, and how old and the condition. Thanks---Rick

 

[Raptor72]

What size tank did you have the chiller on?

 

[ademster]

Ok, guess it would come down to if you would ship it, and how much to send to zip 43560. Oh, and how old and the condition. Thanks---Rick

I can ship it, but I believe shipping it would be more then what it is worth.
its old, but I used it for 3 months, and decided it wasn't for me.

What size tank did you have the chiller on?

Had it on a 240, it worked great, I had it on my 375 it worked, but was always on.

Come get it!!!

 

[007Bond]

I can ship it, but I believe shipping it would be more then what it is worth.
its old, but I used it for 3 months, and decided it wasn't for me.

Its condition should be fine with only 3 months of use. I'm planning on a DIY mod to it. It would just come down to the total end cost.---Rick

 

[Weyrman]

PM sent.