Flow/pressure curves?

[saltyseaman]

I am looking for a needle wheel pump that will push 600 GPH at 40" of head. I see a few on your website that just may work, but I don't see a flow/pressure curve associated with them. Do you know what the GPH flow rate of the following pumps will be at 40"?

Ocean Runner 3700
Gen-X 4100
Gen-X 6000
Sedra 5000
Sedra 9000


Thanks :thumbsup: !

 

[jasonfrey]

Hi,

Unfortunately once they modify with a needle wheel, it changes all the specs on the pumps and none of the manufactures gives ratings on them.

So we wouldn't have anyway to know the pressure curve with the needle wheel, but probably all of them will be pretty low because you loose a lot of flow once you put in a needlewheel in exchange for lots of air.

 

[saltyseaman]

Do you sell the Sedra 15000 needle wheel? I see them come with the ASM G6, but it looks like yours comes with the Sedra 9000. Do you know how many watts the Sedra 9000 and the Sedra 15000 consume?

 

[jasonfrey]

We were sold out on G6, but looks like they are switching to 15000 for the G6 and even some of the smaller ones.

here is the info from the box, but remember this info is for a stock pump, so not sure what changes once it has the needle wheel.

Here is what is on the boxes
KSP-15000
Volts 115V/60Hz. 220V/60Hz
Power Consumption 140W
H/Max 19Ft
Max Flow 1500 GPH
Hose connected inlet 1" outlet 1"

KSP-9000
Volts 115V/60Hz
Power Consumption 90W
H/Max 900Ft
Max Flow 900 GPH
Hose connected inlet 1" outlet 3/4"


thanks

 

[saltyseaman]

Thanks Jason :thumbsup: