Frenchy 120G : from project to build

[g0rilla]

outstanding job so far
subscribed!

 

[g0rilla]

not so patiently waiting for more photos...

 

[Idefixes]

Latest buy : Quarantain Tank. No new frag or fish has to direct in DT in order to prevent pest propagation. This tank is standart one by us (80x35x40(h)cm). It's not my dream QT size as one time DT populated it will be coral propagation tank, but i have no choice room is dramatically lefting....

Equipement : mircon bag for internal overflow, Bubble Magus Curve 5 skimmer, Jebao DC return pump and a stock WP10 for flow. Lignhtening will DIY type as DT tank.

This QT tank will be take place under DT sump in basement (need to empty place)

(Sorry for picture orientation due to host server)

Marc

 

[Idefixes]

So Bulb for QT lightning is on the road. It consist on 2 multi cree/epiled plate.

One plate has on board 16 cree/epiled unit :

CH1: 1x CREE XP-E 450nm, 1x CREE XP-E 470nm, 1x EPILEDS 430nm, 1x CREE XP-E 450nm 12-13V 350-600MA
CH2: 4x CREE XP-G2 6500K 12V 350-1500MA
CH3: 1x CREE XP-E 450nm, 1x EPILEDS 495nm, 1x EPILEDS 660nm, 1x CREE XP-E 470nm 11V 350-600MA
CH4: 1x CREE XP-E 450nm, 1x CREE XP-E 470nm, 1x EPILEDS 430nm, 1x CREE XP-E 470nm 12-13V 350-600MA

I will had 8 Rebel ES lime to these two plate and this for a 60x35cm water area. At 550mA par ch (LDD600H) they give 25W each. I have heatsink and fan in stock for heat dissipation.

Marc

 

[Idefixes]

Little progress (very little due the lake of time) =>building of first (four in final building) light module. Buidling process is quite long as there is 64 holes to do and than tapping these holes in one of the four modules. On these first there still lefting wire sheath job and fan installation

"single" led chanel in function (2x Rebel ES 450nm/2x430nm et 2x OCW(470/490/660nm....Phone camera is out with led on....

So i have 3 more to build....

 

[Idefixes]

First power on in prototype mode for first of four Led module. Each module is 107W rated.

Fan control and controler interface board