My frogspawn is starting to lose a bit of color, kinda turning from green to brown as you can see in this pic.
Params are,
no3: 12 ppm.
Po4: .02-.04 ( hard to read)
alk: 7.28
Cal: 500ppm
Mg:1320ppm
SG: 1.026
Temp: 77°
Have a 6*2*2 foot 180 with a treo of 169watt led modules. Running LEDs at 15% whites/red/green and 60% blues.
I'm thinking my lights are either too high or too low but unsure which. I had a RBTA a little over half way up looking good and bubbled tip, the frogspawn is on the sand bed and I also have a small hammer coral between 1/3 to 1/2 way up that has lost some color in general (tentacles and tips)
Thanks for any help
RBTA
Hammer
Old pic of hammer.
Params are,
no3: 12 ppm.
Po4: .02-.04 ( hard to read)
alk: 7.28
Cal: 500ppm
Mg:1320ppm
SG: 1.026
Temp: 77°
Have a 6*2*2 foot 180 with a treo of 169watt led modules. Running LEDs at 15% whites/red/green and 60% blues.
I'm thinking my lights are either too high or too low but unsure which. I had a RBTA a little over half way up looking good and bubbled tip, the frogspawn is on the sand bed and I also have a small hammer coral between 1/3 to 1/2 way up that has lost some color in general (tentacles and tips)
Thanks for any help
RBTA
Hammer
Old pic of hammer.