FS: 210gal Full Reef Setup

blakers82

Member
Here's the run-down on an entire reef ready setup capable of housing SPS corals. I picked up this used tank earlier in 2011 in case I moved, but this doesn't seem likely now and I simply can't use all this. I'm not breaking down my running SPS tank to transfer animals twice as I would have to put this system up in the same location (It seems I don't have the patience of Doug ☺). I decide it needs to go. Hopefully, this is a great deal for someone.

Please do NOT PM regarding parting equipment out. If that time comes, I will post to let you know. Thank you.


Setup Info


AQUARIUM/SUMP

-Reef-ready Oceanic 210gallon glass display tank with stand and canopy built in 2005/2006. The tank is 6' long X 2' wide X 28"tall. The tank is in good condition with very minimum scratches.
-Oceanic Reef Ready Sump (I believe it is a Model3, it's drilled) with built in refugium section.

FLOW

-(2) Tunze Turbelle Stream 6100 controllable pumps (each has a flow rate of 1,056 to 3,170 US gal per hour) with magnets and a Tunze 7095 controller.
-ReefFlo DART return pump
-Eheim return pump
-Mag return pump

LIGHTING

-(3) 250watt HQI Double-Ended metal halide Reef Optix I pendants (by Sunlight Supply Inc.) These are already bolted to the canopy.
-(2) ballasts to run them (one single and one dual Galaxy ballast(s)). I believe Bulbs (about 1 year old) are 14K spectrum.
-(2) 80watt T5 actinic bulbs (Giesseman Aquablue+ and Giesseman Actinic+) with good reflectors and endcaps are supplied with a...
-Workhorse 7 ballast
-A few PC strip lights are mounted under the tank to help with work underneath and there's also a light for the refugium/live rock section.

FILTRATION

-Coralife Super Skimmer Needle Wheel 220 protein skimmer
-Lifegard Aquatics 40 Watt UV Sterilizer QL-40 with new bulb
-Lifegard Aquatics Triple Chemical Filter Module AF-93-29
-(1) extra unknown brand chemical reactor

SUPPORT/EXTRAS

-ReefKeeper 2 reef controller (This controller has issues and I've found certain sockets on the 8 slot powerstrip are unreliable, but you should get accurate temperature and pH readings. (pH probe is included, but Temp IS included)
-GEO 612 Calcium Reactor with...
-Mag 2 recirculating pump
ARM aragonite media - over half gallon
-5lb Carbon Dioxide Tank
-Milwaukee Regulator with solenoid (I tried this regulator and it does have issues, but I've fixed it before)
-Purely H2O OPTIMA RO/DI Unit (3 stage) with pressure gauge
-Float switches for RO/DI "œAuto-Top Off" leveling in sump
-Hydor 200Watt heater
-Powerstrips, glass magnet cleaner, fan for sump, extra chemicals, sand and more.
*I also have (2) 5 gallon buckets full of dry live rock/rubble for the sump to help get the tank cycled and extra filtration. A few large pieces could work in the display.


I'm selling this all as a full setup. It needs new hosing (highly recommended), to tweak the CO2 regulator again (or snag a better one), and pick up a few bulbs and this setup is good to go. When I did price out all products retail value, it was right around $5200-5270. And that's without costly shipping.


My asking price is $1800. Feel free to price these items out!!

*Note* I apologize for the quality of the pics. The canopy has a second hinge that allows most of the top to swing back, allowing excellent access to this tank. If you are interested, let me know and we can take a closer look.
 

Attachments

  • FTS1.jpg
    FTS1.jpg
    52.6 KB · Views: 3
  • FSumpS1.jpg
    FSumpS1.jpg
    53.1 KB · Views: 4
  • IMG_4646.jpg
    IMG_4646.jpg
    28.7 KB · Views: 4
  • IMG_4650.jpg
    IMG_4650.jpg
    53.4 KB · Views: 4
Last edited:
More Pics
 

Attachments

  • GEO 612.jpg
    GEO 612.jpg
    52.9 KB · Views: 4
  • IMG_4652.jpg
    IMG_4652.jpg
    34.9 KB · Views: 3
  • IMG_4670.jpg
    IMG_4670.jpg
    47.9 KB · Views: 4
  • IMG_4672.jpg
    IMG_4672.jpg
    53.1 KB · Views: 4
  • IMG_4673.jpg
    IMG_4673.jpg
    32.7 KB · Views: 3
and a few more.
 

Attachments

  • Milwaukee Regulator.jpg
    Milwaukee Regulator.jpg
    93.1 KB · Views: 4
  • IMG_4651.jpg
    IMG_4651.jpg
    64.3 KB · Views: 4
  • IMG_4656.jpg
    IMG_4656.jpg
    46.8 KB · Views: 4
Come on up. You are a straight shot on I-35!
 

Attachments

  • photo-14.jpg
    photo-14.jpg
    35.9 KB · Views: 3
  • photo-15.jpg
    photo-15.jpg
    59.6 KB · Views: 4
  • photo-16.jpg
    photo-16.jpg
    69.2 KB · Views: 2
The RO/DI has a pressure gauge on the unit.
 

Attachments

  • IMAG0094.jpg
    IMAG0094.jpg
    54.6 KB · Views: 4
  • IMAG0096.jpg
    IMAG0096.jpg
    30.3 KB · Views: 4
Give me a call, MBryant. :wave:

CO2 tank is freshly full. And to be clear...the Geo 612 calcium reactor has a probe opening and a single working pH probe IS included.
 
You're welcome. I'm already missin some of that gear, but glad someone is getting to use those Tunzes. Or atleast use them soon. :)
 
Tank is doing well, Last night it started leaking way up high in the corner. Nothing a little calk couldnt fix. Here are some Pics..
 
Back
Top