G1 flashing on and off

[fessoclown]

I have a G1 Radion that I have decided to use again after 3-4 months sitting in the closet. It worked just fine when I put it away.
I just plugged it in and all the LEDs come on then go off. It is flashing on and off about every 3-4 seconds.
I tried a firmware update and it said that it worked.
I tried a factory reset and nothing seemed to happen.
I set up a new profile in EcoSmart Live and tried to program a schedule and it said that it was successful but the flashing on and off continues....
Any ideas?

 

[fessoclown]

I just tried the "cycle" button on the unit and the LEDs stopped flashing but now the is no response for anything. The little light is flashing Red and Green.

 

[CoralNerd]

How fo you control the lights? Apex?

Been there, you need to hook it up to your computer then disable the buttons, that us if you're using apex with it. Someone else can also chime in.

 

[fessoclown]

Thanks for the reply.

I use EcoSmart Live to program. I have an Apex but never saw the point in spending the $$ on the module for the Radion as EcoSmart live seems to work just fine for programming.

Alright, I just disabled the Radion Buttons through connection manager, got the dialogue box that said that the buttons were successfully disabled but I am still getting the 3-4 second flashing of all the LEDs.

 

[scottneeld88]

I had the red light blink when i had a fan go out in one.

 

[Alex Y EcoTech]

I have a G1 Radion that I have decided to use again after 3-4 months sitting in the closet. It worked just fine when I put it away.
I just plugged it in and all the LEDs come on then go off. It is flashing on and off about every 3-4 seconds.
I tried a firmware update and it said that it worked.
I tried a factory reset and nothing seemed to happen.
I set up a new profile in EcoSmart Live and tried to program a schedule and it said that it was successful but the flashing on and off continues....
Any ideas?

Fesso,

Is the fan running on that Radion, and have you tried connecting the light to a different power supply at all?

 

[fessoclown]

The fan is running. It would seem that there is a power supply issue as yes the lamp seems to work fine with a different power supply. Am I buggered? It is well out of warrenty....

 

[Alex Y EcoTech]

The fan is running. It would seem that there is a power supply issue as yes the lamp seems to work fine with a different power supply. Am I buggered? It is well out of warrenty....

Fesso,

You will need a new power supply for your Radion. That said, please contact us directly to discuss your options.

 

[fessoclown]

Thanks, I did submit a ticket and got a response very quickly. I am just too busy to deal with this at the moment. I'll get to it next week.
Cheers!