Is that assuming the light is 9" above water level?
930am to 9
Hampmp,
Our Wide Angle TIR Lenses, work best on aquariums 24 inches deep or less.
Is that assuming the light is 9" above water level? I have the g3 with the 120 lense. Only had for 2 weeks... Trying to figure them out... At 45% the tank looks dim.... I'm afraid to go higher because of bleaching
Sps are ok, zoanthids towards top are stretching
Challace sat bottom are bleached
So I'm totally confused
Running radiant color mode
930am to 9
Hampmp,
Our Wide Angle TIR Lenses, work best on aquariums 24 inches deep or less.
just the change in lighting alone can cause bleaching, but for chalices or lps in general i dont think they require nearly the light that every one throws on them, Jason fox posted on another forum from 1 of his dives where he finds chaliced in very deep water and said " we are burning our lps with to much light", i dont know much about chalices because i dont keep many, the ones i do keep are on the sand in my 105 that is 21" deep and my 3 gen 2's are 14" from the water surface running radiant color ( 6:00am to 10:30pm) at a max intensity of 40%, no bleaching and very vibrant colors, but in my experiences and many many others when zoas are stretching they are trying to get closer to the lightHow could they possibly need more light when I'm bleaching challace a that are in the sandbed.... That's the strange part
This is a unfortunate down side to LEDs. Many tanks look dim and people crank them up. I am in the same boat as you with the lights 12" above the water I could not have the lights higher then 45%. I have since raised my lights to 17" off the water and max out at 80%. This gave the lights a more appealing brighter appearance but not a t5 or halide type brightness. I have the wide angle lenses and it does waste some light illuminating the room.