Getting out of the hobby sale in Strongsville

[Rick2880]

Ice Cap 660, no wire harness. It worked fine 5 years ago when I used it last. As is

<a href="http://s1207.photobucket.com/user/Rick_Arnholt/media/icecap660.jpg.html" target="_blank"><img src="http://i1207.photobucket.com/albums/bb468/Rick_Arnholt/icecap660.jpg" border="0" alt=" photo icecap660.jpg"/></a>

$25

 

[Rick2880]

Does anyone use metal halides anymore? I have 4 double ended pendants and three electronic ballasts. 400W. Also used bulbs 14K range.

Make an offer

 

[Rick2880]

The word is that it will be a cold winter. BJ TRUE TEMP Titanium Heating System. New in the box, never used. T3-150 watt heating system.

<a href="http://s1207.photobucket.com/user/Rick_Arnholt/media/20141009_000422_BradfordCt.jpg.html" target="_blank"><img src="http://i1207.photobucket.com/albums/bb468/Rick_Arnholt/20141009_000422_BradfordCt.jpg" border="0" alt=" photo 20141009_000422_BradfordCt.jpg"/></a>

$30

 

[EDAT6]

PM sent

 

[EDAT6]

PM sent

 

[lawdog]

Got the Denitrator setup and running last night... so far so good! Thanks.

Also bump for a great seller... unbelievable tank for the price... saw it in person. would be worth the price to hire some movers to go get it or just get 3 friends and some suction cup handles and take it to a new home... this beast of a tank needs a new home!

If I hadn't just upgraded myself I would jump all over the tank...

 

[shadd89]

Pm srnt

 

[Jaculus]

Also bump for a great seller... unbelievable tank for the price... saw it in person. would be worth the price to hire some movers to go get it or just get 3 friends and some suction cup handles and take it to a new home... this beast of a tank needs a new home!

If I hadn't just upgraded myself I would jump all over the tank...

If I had not just bought your 120 and got it all cleaned up and polished I might have thought more about this too. BUT the move from the 75 gal reef to your old 120 wasn't going to happen until Monday and tuesday next week. Maybe I need to convince the wife to do this instead LOL.

 

[Rick2880]

Thanks lawdog,

The heater is no longer available

I found some more pumps. All work fine.

Supreme Mag Drive Pump, with two new impellers,
Rio 2500 Pump
Rio 3100 Pump
Little Giant 2-mdq-sc

$25 each

I am pretty certain that I have every imaginable PVC fitting between 1/2" to 1.5" as well as some in the 2" range, new and used bulkheads, ball valves, unions. Every type of JACO, John Guest fittings. Tubing of all sizes. Black High Density Polyethylene Tube Fittings of all sizes, NPF, and nipple. Misc powerheads. Too much to list.

For those that are coming over this weekend to look at specific items, feel free to look around I will consider any reasonable offer.

Thanks
Rick

 

[Rick2880]

Are Aquatronica controllers still a thing? I trust as a society we have progressed beyond 2006 technology but it has worked well for my needs. I have the controller power strip and misc probes for free if any one wants them.

 

[Rick2880]

Updated availability and price list as of 10/10/14

2-Barracuda Reeflo Pumps - New seals 2010 $125 each

2-Oceans Motions 4 Ways: $50 each

Geo Calcium Reactor. 6" diameter 24" high. Includes Little Giant 2-MDQ pump, CO2 regulator, CO2 20# tank. $175

1/3 Horse Power Chiller AT-5000. Effectively cools up to a 400 gallon system. As is. $75

Pumps:
Iwaki, MD55RLT Japanese Motor - $125

Iwaki, MD55RLT Japanese Motor - needs a kick start with a screw driver to get started, but a good back up pump or for use on water changes - $20

Iwaki, MD 30RXT Japanese Motor $50

Supreme Mag Drive Pump, with two new impellers $20

Rio 2500 Pump $10

Rio 3100 Pump $15

Little Giant 2-mdq-sc $20

1-Euro Reef 802 Skimmer modified with 2 Sicce PSK1000 Pumps $175

Acan 800-48B Series 48" LED $800. Two years old and retails for $1500 or more.

160 Gallon vertical tank with Kent float valve $125

Magnavor 4 ER Magnetic Cleaner $40.00

Nu-Clear Water filter canister $50

2 Bucket of crushed coral/shells Substrate $10 each

 

[MJAnderson]

Word of caution when dealing with Rick. I told him I would take the sump, he responded and we set up a time to pick it up on Saturday. Tonight he PMs me to tell me he sold it. Now I'm stuck with a bunch of wood I picked up to build a stand for it (I have a basement sump).

Buyer beware. Not a person I would consider doing business with again.

 

[lawdog]

Gotta stick up for Rick... Good guy and good seller selling a system at basically fire sale prices... If someone shows up with cash in hand versus someone who just says via pm/ text I will take an item and pick it up on such a date... Cash in hand gets the sale...

Sorry I can't fault him for wanting to sell now over a promise to buy at a later date... Most sellers don't hold anything... and unless you prepaid via PayPal then I don't think there is much of a beef.

You can't expect someone to hold something without payment or direct knowledge of that buyer...

Remember a buyer can flake at anytime... Many times I have been told I want to buy that from you but when time comes to show up and pay...? Nada.

It stinks you couldn't get there before someone else did...but that is not his fault.

 

[MJAnderson]

Call me crazy but I do expect people to keep their word and to back up a promise. I've never believed in the "someone might screw you over so it's ok if you screw someone else over." I've dealt with several great sellers on the site who kept their word and followed through on a handshake deal. My comment was for them.

 

[Jaculus]

Omg. If I had a dime for every time someone said I will get it next week or can you deliver it etc. I know I am going to start the policy of money in hand or paypal and it's yours. Otherwise hurry up. Lol. It's tough in these large sell offs though. It's probably impossible to keep track of promises and pm, s.

 

[EDAT6]

Just picked up the Calcium reactor setup..... Wish I would have had more time and $$, I could have done a lot of damage!
Good communication and a very smooth transaction.
Thanks!!

 

[Rick2880]

Don't pile on MJ, I did agree to sell the sump to him. I apologized to him via PM. I am apologizing again publicly.

I have been trying to sell the 310 for 7 months. I've had more than 20 guys come look at it. Some were going to buy it sight unseen based on the price until they seen it...and just how big it is. Its a unique tank in a market that is limited to NE Ohio.

I am moving in two weeks, I had a buyer for the 310 contingent on several other items. I needed to take it.

Rick

 

[Rick2880]

Updated availability and price list as of 10/14/14

Acan 800-48B Series 48" LED $800. Two years old and retails for $1500 or more.

2-Barracuda Reeflo Pumps - New seals 2010 $125 each

2-Oceans Motions 4 Ways: $50 each

1/3 Horse Power Chiller AT-5000. Effectively cools up to a 400 gallon system. Thermostat is broke (it wont shut off automatically), but it works. Try to think of summer and a hot tank. This is an easy way to cool it for $50

Pumps:
Iwaki, MD55RLT Japanese Motor - $125

Iwaki, MD55RLT Japanese Motor - needs a kick start with a screw driver to get started, but a good back up pump or for use on water changes - $20

Supreme Mag 2 Drive Pump, with two new impellers $20

Rio 3100 Pump (various fittings and suction cups) $10

Little Giant 2-mdq-sc $20

3 400 watt electronic ballasts as well as 4 double ended pendants. I have used bulbs that still work and will include $50 for each ballast and pendant combined.

160 Gallon vertical tank with Kent float valve $125. These are $300 plus shipping via freight. 68" high, 28" diameter. It has a 2" bulkhead fitting at bottom. I've attached a 2" ball valve as well as a male adapter with a bushing reducing the output to 1". All connections are NPT and can be removed (not solvent) Free masonry blocks to sit it on.

Magnavor 4 ER Magnetic Cleaner $40.00

Nu-Clear Water filter canister $50

Ice Cap 660, no wire harness. It worked fine 5 years ago when I used it last. As is $25

Two 1.5" True Union ball valves $25 each

BRS dosing pump .066 liters per hour $25

Things that will be thrown away after this weekend. FREE for pick up

2 Bucket of crushed coral/shells Substrate

Rio 2500 Pump

1 Sedra KSP 5000 and 2 Sedra KSP 9000 all need impeller assemblies. All work.

PVC fittings, pipes, tubing, unions, ball valves etc.

Maxi Jet pumps, with suction cups, various attachments

A bunch of other things too.

Thanks
Rick

 

[Jaculus]

I will take the Ice Cap ballast and likely the BRS dosing pump. Might get more when I see what you have. I can not get there until late friday or the weekend. Will bring cash lol. I will pm you so you can respond to my cell phone via text with times you will be available to stop in.

I will contact you before I do show up though anyhow to be sure you did not sell these already. First with cash gets the stuff lol.

 

[TreyK]

Hey Rick, I will come pick up all of the PVC stuff. I can't get the cepex ball valve I picked up from you apart either lol. You must have wrenched it down pretty tight.