GFO and Carbon reactor ?

[oseymour]

I found the Mur lock fittings on BRS and I'm going to try to mod it myself. I'll let you know how it turns out. I purchased the t line, some elbows, valves and 1/2 inch tubing

 

[stuart310]

I was thinking of doing this same thing but also adding brs biopellet as a third with a control valve

 

[oseymour]

I was thinking of doing this same thing but also adding brs biopellet as a third with a control valve

You better get a pump that handles head pressure well like a mag drive. And how do you plan on splitting into 3? I couldn't find any mur lock fitting like that anywhere.

 

[stuart310]

You better get a pump that handles head pressure well like a mag drive. And how do you plan on splitting into 3? I couldn't find any mur lock fitting like that anywhere.

Yea I have a dc6000 pump which should be able to handle it. I went to home Depot and just got a tee for splitting the lines. I'll use several tees and mur locks for control

 

[Frozenguy]

BRS dual and just use enough foam so your carbon doesn't tumble.

 

[stuart310]

Does anyone know where I could get a 1/2 inch Mur loc divider like what is shown in the SpectraPure model

 

[uf_gators]

I was looking at the murloc fittings at marinedepot. I think they had the Y in 1/2 along with1/4.

 

[uf_gators]

It was the union Tee that was 1/2. Not the Y. On the murlok

 

[stuart310]

I was looking at the murloc fittings at marinedepot. I think they had the Y in 1/2 along with1/4.

Nope they only show 1/4

 

[AZRippster]

http://www.ebay.com/itm/NEW-Legris-...297?pt=LH_DefaultDomain_0&hash=item2c951b0a39

 

[AZRippster]

And don't forget the backside return or feed (depends on how you want to run them):

http://www.ebay.com/itm/Tubing-Fitt...360?pt=LH_DefaultDomain_0&hash=item3a5e8475b8

or

http://www.ebay.com/itm/NEW-1-2-Hos...033?pt=LH_DefaultDomain_0&hash=item19fb6c05f9

So, add up 2 valves and the 2 Wye's... How much below $99 are you? That's how much the Spectra Pure version is complete.

 

[stuart310]

And don't forget the backside return or feed (depends on how you want to run them):

http://www.ebay.com/itm/Tubing-Fitt...360?pt=LH_DefaultDomain_0&hash=item3a5e8475b8

or

http://www.ebay.com/itm/NEW-1-2-Hos...033?pt=LH_DefaultDomain_0&hash=item19fb6c05f9

So, add up 2 valves and the 2 Wye's... How much below $99 are you? That's how much the Spectra Pure version is complete.

Thanks I already have much of the equipment laying around from old r/o supplies

 

[TAZ_67]

BRS dual and just use enough foam so your carbon doesn't tumble.

That is what i am doing now.