GHL Mitras Club

[AQD_ottawa]

Does anyone have lighting programs for the LX 6200 HV? might be easier to load a program already done instead of taking the chance on stressing my clams and corals.

email info@ghlna.com

 

[AQD_ottawa]

GHL has done it again!! second year in a row!

GHL wins the coveted Innovation award from the German ministry! Talk about technical excellence!

 

[dcmartinpc]

I've asked around and gotten about 15 different answers, so I figured I would ask here and get another 10

I run my Mitras over a 60 gallon 2x2x2 cube. I'm trying to settle on an intensity. It is 12" off the water and I am currently running it in 'High Output' mode at %75 using Rodney's profile offset 2 hours later so I can view it better at night. Am I in the ballpark? Am I too hot? I am running a mixed reef. SPS at the top and Zoas and Acans on the bottom.

Thoughts? I really appreciate the help!

Don

 

[AQD_ottawa]

everything fine but change to high efficiency, you really dont need high intensity.

 

[dcmartinpc]

everything fine but change to high efficiency, you really dont need high intensity.

High Efficiency at %75 or should I bump it up?

Don

 

[AQD_ottawa]

got to 80%

I run mine at 80% high efficiency

 

[dcmartinpc]

got to 80%

I run mine at 80% high efficiency

Thank you SO much for the quick response!

You can't ask for much better support for a product. Other than $, I simply cannot understand why someone would want to run anything but the Mitras!

I absolutely love this light!

Thanks again,

Don

 

[AQD_ottawa]

No problem always on hand to help

 

[Johnic]

Aqd, see you have the mp40 too.
If I get the mitra fixture and currently have two mp40w power heads. how easy is it to control the heads remotely?

 

[AQD_ottawa]

if you have the GHL ProfiLux controller then you will be able to control all connected device remotely providing you have the wireless card in the controller to interface with the mitras and the GHL vortech controller.

 

[Johnic]

if you have the GHL ProfiLux controller then you will be able to control all connected device remotely providing you have the wireless card in the controller to interface with the mitras and the GHL vortech controller.

Gotcha. Thanks. Is the programming easily done with the ghl controller?

 

[AQD_ottawa]

the embedded software into the profilux for the mitras does not come out until next month in line with the launch of the wireless card, however yes it is very straightforward, its menu driven so no need for crazy algorithms etc

 

[Johnic]

the embedded software into the profilux for the mitras does not come out until next month in line with the launch of the wireless card, however yes it is very straightforward, its menu driven so no need for crazy algorithms etc

Ok. So next month is big. Prob wait until then.

 

[AQD_ottawa]

the next year for GHL is big lots of things happening

 

[AQD_ottawa]

Thought I would share these photos from a new dealer setting up!

They chose Mitras for all their coral vats, but not just few, oh no! as the photos show, a mass of them! Not specifically required to do the job, but the owners wanted extreme forward flexibility in their systems.

Enjoy!

 

[Anim8me2]

HOW DID THEY MOUNT THOSE!
I am still looking for a good way to mount my Mitras to the 80/20 frame I am building.
If anyone has any suggestions I am in a real bind and need to get them hung fast.
I am currently balancing them on drinking glasses over my tank after my ATI unit pulled out of the drywall ceiling!

 

[MSHUR]

Here is my set up. Simple but i can have different options if i ever wanna change it

 

[MSHUR]

Sorry for bad pic but you get a idea

 

[Anim8me2]

That is nice... but I already made the frame with 80/20 aluminum.
http://www.8020.net/T-Slot-1.asp

 

[rtaramelli]

Tank levels

Tank levels

[Dear Arron,

could you help me with levels in my tank. I have 6 mitras 6200hv on my 6 foot tank but my clams never come out of their shell.

not sure if my salt or other things are off.


thanks