CWebHokie
New member
I've been hearing a lot of talk about the new Tunze NanoStreams that came out this week and have pretty much decided that I am going to put a couple in the 40 Breeder that I will be starting in a couple months. That is so long to wait though and since I have never been happy with the flow in my 30, I figured why not? Having never owned any Tunze products myself I was just going off of what I had heard on RC and others that use them. I ordered a 6025 which is the smallest of the three different Nanostreams and I must say I'm impressed. Here are a few pics.
They are definitely worth it. The smallest one blows away a MaxiJet1200 on flow and power consumption.
The 6025 gives a good amount of flow in my 30 gallon. In a tank any bigger I would start looking at the 6045. (almost 2x the flow @ 1189 gph) I will probably put 2 6045's in my 40 Breeder. If you want a nanostream that works with a Tunze controller you have to go with the 6055 but they are considerably more expensive.
If you need a flow upgrade in your small tank, I would highly suggest ordering some of these puppies as they become more readily available.



They are definitely worth it. The smallest one blows away a MaxiJet1200 on flow and power consumption.
The 6025 gives a good amount of flow in my 30 gallon. In a tank any bigger I would start looking at the 6045. (almost 2x the flow @ 1189 gph) I will probably put 2 6045's in my 40 Breeder. If you want a nanostream that works with a Tunze controller you have to go with the 6055 but they are considerably more expensive.
If you need a flow upgrade in your small tank, I would highly suggest ordering some of these puppies as they become more readily available.