Charleslee
New member
I just changed the membrane for the first time on my Aqua FX Barracuda R/O & the water flow coming out of the unit has been greatly reduced to the point where I ran it all day yesterday & it only produced around 15 gallons. I doubt it even puts out a 1/3 of what it previously did. The PSI is 50. I don't know what the TDS is, I don't have a meter but plan on acquiring one. There hasn't been any change in water pressure coming into the system so the problem must lie w/in the r/o itself. I tried disconnecting the tube after it comes off the product water to allow it to drain for a couple minutes to remove the preservative (sodium metabisulfite) that comes on a new membrane as advised in an Aqua FX video but water wouldn't come out. The other method was to remove the DI filter but I chose not to do that. Any ideas, ladies & gentlemen?