Grounding Probes

i use one. you should use one especially if you have an older house, such as mine, or if you just removed wood floors recently. they are just a precautionary device that every tank should have as well as a GFCI. GET ONE!
 
I also use one in every tank I own. A grounding probe has to be used with a GFCI reference before it will work properly. Most GFCI trip range are 5 mA ground faults. If all your equipment are plug in to a GFCI including the grounding probe any ground faults over 5mA SHOULD trip the circuit.
 
After my submersible heater came apart and electocuted the whole tank, killed all corals, inverts, and fish, contaminated the LR, LS, plumbing, and silicone with copper, I consider a ground probe and GFCI a must.

It was without a doubt the most complete destruction that I've ever seen of a reef tank, short of a tank coming apart and flooding the house.

A ground probe was the first thing I bought when I started over.... I won't make that mistake again!

Chuck
 
cczarnik...sorry about your tank being fried! i had a heater's remote thermostat short out on me. i didn't have a grounding probe but luckily i was home and heard the sparking and could unplug it before it killed everything or crack my sump. the water
smelled like burnt plastic for about 4-5 days.


One good piece of advice I got from this guys article is to make everything external. That would eliminate the need for a probe and the risk of loosing all power. Although he mentioned using an internal heater there are in-line heaters that should work.

So the addition of a grounding probe will cause the GFI switch to trip when a short occurs, killing the power to the system on that switch, assuming it is grounded somewhere other than the GFI plug. Correct? Hopefully I am home if this ever happens or else the tank with go without power putting the livestock in jeopardy.

IMO...make everything in your system external as the article suggestest and use a probe.
 
''Voltage is not the problem, current is. Voltages can exist without there being any current. For example, birds sitting on a power line may be in direct contact with 10,000 volts, but they are not electrocuted. Why? Because no current is flowing through their bodies. Voltage is the “potential” or force that drives electrons through a conductor. The actual flow of electrons is the “current”. It is current that kills. Were one of the birds sitting on the power line to simultaneously touch one of the other wires on the transmission pole, a current path would be created (through the bird) and it would be electrocuted (and probably incinerated as well). So what are you doing when you add a grounding probe to your aquarium? You are providing a current path that might not already exist.''

This is from that article.

I would rather that grounding probe to providing a current path to ground then MY HANDS AND FEET.
 
<a href=showthread.php?s=&postid=11482147#post11482147 target=_blank>Originally posted</a> by racksteris
''Voltage is not the problem, current is. Voltages can exist without there being any current. For example, birds sitting on a power line may be in direct contact with 10,000 volts, but they are not electrocuted. Why? Because no current is flowing through their bodies. Voltage is the “potential” or force that drives electrons through a conductor. The actual flow of electrons is the “current”. It is current that kills. Were one of the birds sitting on the power line to simultaneously touch one of the other wires on the transmission pole, a current path would be created (through the bird) and it would be electrocuted (and probably incinerated as well). So what are you doing when you add a grounding probe to your aquarium? You are providing a current path that might not already exist.''
I would have to totally agree. I would never use a GP in my tank. Just use a few gfci circuits and you will be ok, and Ccz your fish were not electrocuted.
 
USE A GROUNDING PROBE. if your house house is old and wiring is out of date you need to use one. if you have new wiring then you might want one to be on the safe side to remove stray voltage.
 
i once had a tank that had a few gfcis on it but i still got shocked. once i put a GP on it the shocking stopped. Another thing is that if you have wood floors you will neutralize the shock but if you have concrete or tile and have stray voltage you will feel it if not properly grounded. i am saying this b/c alot of people who live in the north usually have wood floors.
 
Thank you all for your replies. I do believe that I am going to use one. I have wood floors but old wiring. My house was built in 1885.
 
Most of the old house only have 2 prong receptacle. They don't carry the third ground prong. Too avoid shock with this type of wiring, A GFCI receptacle should be installed in the location of your tank.

Hey Crossbow, was your house really built in 1885?
 
<a href=showthread.php?s=&postid=11489415#post11489415 target=_blank>Originally posted</a> by MikePowell
i once had a tank that had a few gfcis on it but i still got shocked. once i put a GP on it the shocking stopped.

So you put a band aid over your problem. You either had a malfunctioning part, or it was just a static charge. If you have a PH or something leaking voltage, and add a GP. Now you have a current running through your tank, and every time a fish swims through it it gets a jolt.
 
Yes racksteris, it was built in 1885 by a doctor. Lots of neat features like a pocket door, nice moldings, very nice hand carved fireplace, granite and brick foundation. I did have a GFI installed by my electrician, but I am going to use the probe as well.
 
<a href=showthread.php?s=&postid=11492885#post11492885 target=_blank>Originally posted</a> by Crossbow
Yes racksteris, it was built in 1885 by a doctor. Lots of neat features like a pocket door, nice moldings, very nice hand carved fireplace, granite and brick foundation. I did have a GFI installed by my electrician, but I am going to use the probe as well.

WOW .. sounds cool...
 
My temperature was slowly dropping, the one day i put my hand in it felt really cold so i checked my temp probe and it was at 74.6 degrees so i check my heater and it was all cracked and a piece was missing, i was lucky i never got shocked
 
Back
Top