Help!!! 240g Sps Catastrophe!!!!!

Status
Not open for further replies.
Seachem Prime can be found via Google, just for a visual. How your LFS owner could not know what "prime" is is shocking. It is one of the most basic products sold to anyone in the hobby. Here's a link to it on Marine Depot's site:

http://www.marinedepot.com/ps_viewi...emPrime2L&utm_campaign=mdcse&site=google_base

You can purchase it at stores like Petco and Petsmart. Ammonia and Nitrite are toxic to fish - it is poisoning them slowly to death. Prime locks this up to protect the animals gills. Corals don't tolerate it much better, as you can see. AmQuel would help too. There are quite a few ammonia-reducing products on the market. The biggest concern is that the product be new and not old from sitting on a shelf in your home for years. Same with those test kits. When a disaster like this strikes, you want the most accurate readings and products to use, even if you do have to drive an hour to and from that LFS.

I'm really sorry to read how badly this has turned out, as I was hoping for a reasonable bounce back due to your initial efforts.

You asked about how to maintain water quality in a quarantine system. Water changes are the best option, changing water every three days, or 10% daily if you find that is easier. In that tank, you'd also measure ammonia daily, due to stress from handling.

I'm glad you have some people in the area willing to hold onto your future livestock.
 
My father is a master electrician, much of the DIY lighting on this forum is down right frightening, yours included -- especially without protection from the surface water, I'm surprised you haven't had a major fire by now. I've seen so many disasters on this forum I implore everyone to HIRE PROFESSIONALS to do their plumbing and electrics!!!

For one, our rules expect people to be nice. I'm pretty sure you can find a tactful way to express facts/opinions. This post is uncalled for.~dc

EVERYONE on this forum should heed this thread and learn from it!
 
Last edited by a moderator:
<a href=showthread.php?s=&postid=14239601#post14239601 target=_blank>Originally posted</a> by Tabatha
My father is a master electrician, much of the DIY lighting on this forum is down right frightening, yours included -- especially without protection from the surface water, I'm surprised you haven't had a major fire by now. I've seen so many disasters on this forum I implore everyone to HIRE PROFESSIONALS to do their plumbing and electrics!!!

*EDITED*

EVERYONE on this forum should heed this thread and learn from it!

Your post may - yes may have merit - but not in this thread! The OP was asking for help, not someone to kick him in the head after he has been back over with a car. Perhaps this post in the DIY section.... Go debate it over there.

Zachtos - I'm in Michigan (Howell) - if I can help in any way. PM me and if I can help, I will.
 
Last edited by a moderator:
<a href=showthread.php?s=&postid=14239601#post14239601 target=_blank>Originally posted</a> by Tabatha
My father is a master electrician, much of the DIY lighting on this forum is down right frightening, yours included -- especially without protection from the surface water, I'm surprised you haven't had a major fire by now. I've seen so many disasters on this forum I implore everyone to HIRE PROFESSIONALS to do their plumbing and electrics!!!

*EDITED*

EVERYONE on this forum should heed this thread and learn from it!

talk about the case of wrong time wrong place:rolleye1:
 
Last edited by a moderator:
<a href=showthread.php?s=&postid=14239601#post14239601 target=_blank>Originally posted</a> by Tabatha
My father is a master electrician, much of the DIY lighting on this forum is down right frightening, yours included -- especially without protection from the surface water, I'm surprised you haven't had a major fire by now. I've seen so many disasters on this forum I implore everyone to HIRE PROFESSIONALS to do their plumbing and electrics!!!

*EDITED*

EVERYONE on this forum should heed this thread and learn from it!
 
Last edited by a moderator:
<a href=showthread.php?s=&postid=14240022#post14240022 target=_blank>Originally posted</a> by marineaddict
Your post may - yes may have merit - but not in this thread! The OP was asking for help, not someone to kick him in the head after he has been back over with a car. Perhaps this post in the DIY section.... Go debate it over there.

Zachtos - I'm in Michigan (Howell) - if I can help in any way. PM me and if I can help, I will.

marineaddict, in essence, you've proven my point. By avoiding the issues, you're not helping.

The damage is done. Start the post-mortem process so this, and other disasters, can be prevented from happening again.
 
So sorry, man :( That has to suck. My deepest condolences and don't regret the DIY job you did. We all human right? Mistakes only make us stronger.

Anyways, I agree with melev's advice on dosing seachem prime. A friend of mine had a 10g tank. It had a sudden spike in ammonia because of some rather awkward die offs. To save his two clownfish and various corals, he immediately dosed some months old leftover prime. The ammonia levels went down to zero and stayed that way for weeks as he did water changes. Everything survived.

hth
 
<a href=showthread.php?s=&postid=14240230#post14240230 target=_blank>Originally posted</a> by Tabatha
marineaddict, in essence, you've proven my point. By avoiding the issues, you're not helping.

The damage is done. Start the post-mortem process so this, and other disasters, can be prevented from happening again.

I'm sorry but you are the one not helping in this case. As I said, go to the DIY area and post away. In this case he wasn't asking for DIY help he was trying to save what little was left of his reef.

BTW - I don't disagree with some of what you said... Just wasn't the time for it IMO. Perhaps if the thread was "DIY plumbing and electrical advice"
 
<a href=showthread.php?s=&postid=14240301#post14240301 target=_blank>Originally posted</a> by dc
<i><br>Here at Reef Central, we believe that dialogs between participants should be conducted in a friendly and helpful manner. If you disagree with a posting, please express yourself in a way that is conducive to further constructive dialog. Conversely, when you post on any given subject, you must be willing to accept constructive criticism without posting a hostile or inflammatory response. Personal attacks of any kind will not be tolerated. Please let�s work to insure that Reef Central remains a friendly and flame free site where everyone, especially newcomers, can feel free to post questions without fear of being unfairly criticized. Thank you for your cooperation.</i>

I oppose Squidward5's post accusing me of being a troll. I believe that my advice of hiring licensed electricians and, in this case, a licensed plumber, would have prevented this horrific disaster. To say that others can learn from this mistake, is not trolling in any way, shape or form. Further, I believe this statement is highly helpful and informative!
 
Tabatha - once a moderator steps in, you better back down quickly if you want to continue using Reef Central. Your point could have been made clearly and emphatically while still being diplomatic.

If you were to go to a job site full of construction workers and berate them, odds are it would be fine. However, if you start berating your homeowners that are hiring you to work for them, you'll be shown to the door quickly. I've worked construction, and know what that world is like. And I've been posting online on many forums for a long time, and know what that is like. The two worlds are NOT related.
 
Status
Not open for further replies.
Back
Top