Help with dimming leds

[SMDBOYZ]

I found this on the web and tried it
It works up until the lights come on full power
I wanted them to no be past a certain percentage
So i put 75 for blue and 50 for white but it just keeps going to full power
Im sure this is a shock to the corals and its been like a week before i noticed it didnt work as stated
I need it to come on blue then slowly come to a brightness of 75 then dim off
Same with the white but starting later and ending earlier
Any help would be great
I really havnt got a chance to play with this yet is so overwhealming





W_Sun
Control type: Ramp
Ramp time (minutes): 120
Start intensity: 0
End intensity: 50

B_Sun
Control type: Ramp
Ramp time (minutes): 30
Start intensity: 0
End intensity: 75



W_On
Control type: Advanced
If Sun 240/000 Then ON

B_On
Control type: Advanced
If Sun 105/120 Then ON



White_LED_D
Control type: Advanced
Fallback OFF
Set OFF
If Sun 120/000 Then W_Sun
If Outlet W_On = ON Then ON

Blue_LED_D
Control type: Advanced
Fallback OFF
Set OFF
If Sun 090/120 Then B_Sun
If Outlet B_On = ON Then ON



White_LED
Control type: Advanced
Fallback OFF
Set OFF
If Sun 120/121 Then ON

Blue_LED
Control type: Advanced
Fallback OFF
Set OFF
If Sun 090/136 Then ON

 

[SMDBOYZ]

Please

 

[aquamanic]

It's one or more of your 'Then ON' statements. When you do that, you've essentially bypassed your profile (and it's limit of 75%). Instead of "Then ON" use "Then [profilename]". There are examples in the User Guide.