Help with tank flow

[reefjester]

I'm getting a 350 gal and have been researching closed loop systems. Then saw the Turbelle Stream kit. Was wondering what your suggestion would be for schematic for good tank flow. Planning on strong SPS tank with some LPS and few leathers.
Also, I'm located in Eugene, Or. Where could I find a dealer or where can I order online? Thanks :jester:

 

[rvitko]

Can you give me dimensions and tell me a bit more about your system such as return and closed loop if you are going to include this?

 

[reefjester]

I think you can see same pics at;http://reefcentral.com/forums/newreply.php?s=&action=newreply&threadid=161344:jester:

 

[reefjester]

The dimentions are 81x30x30 with a 4" box on both back corners for overflow. Then a the top 4" inbetween is overflow.
I wasn't set on my return or closed loop system yet, was hoping for imput on that. Thought about a seaswirl in front for return.:jester:

 

[reefjester]

Actually this will work better ! I hope!http://www.thereeftank.com/photopost/showphoto.php?photo=149 :jester:

 

[rvitko]

I would use 2 6100 Stream pumps with a multicontroller, KIT TS24. I would position each pump is a back corner angled at 45degrees to the center front pane. I would alternate the pumps at 3 hour intervals using tide mode. I would continue to use a SeaSwirl as they are an excellent adjunct to the Stream pumps.

 

[reefjester]

Thank you, that is better than what I had stuck in my head! The kit TS24, is that the Mulitcontroller 7094? My only info site for your product is Marine Depot and the information is a little sketchy without talking to someone. Is M.D. my only resource for buying from my location Eugene, Or. or is there a dealer near by?:jester:

 

[rvitko]

At present, this is your nearest resource. If you have a LFS you want to work with they will have no problem matching MD's price if you want them to contact me, i am always pleased to work with a local vendor. The TS24 kit is two 6100 and a 7094 multicontroller. You might want to check www.tunze.com for more info. I can also send you PDF of manuals by email but they are very large files that are only practical for high speed internet.

 

[reefjester]

Roger, thank you for your assistance. I will beg my LFS, otherwise go through the web. No need to send the manual. I've got a good idea which direction to go now. Thanks again, you saved me working over my braincells. :lol: :jester: